User Manual

Trigger pads
Depending on the assign type, the trigger pads can transmit note messages or
control change messages. For each trigger pad, you can individually specify
the assigned message, the MIDI transmit channel, the behavior of the trigger
pad, the note number, the control change number, the values transmitted when
the pad turns on or off.
Depending on its assign type, note number or control change number can be
assigned to a single trigger pad and transmitted. If you transmit note messag-
es or control change message from a trigger pad, all of the messages will be
transmitted at the velocity or On Value/Off Value.
MIDI Channel [1...16/Global MIDI Channel]
This specifies the MIDI channel of the MIDI messages that are transmitted
when you strike the trigger pad. If you set this to “Global MIDI Channel,” the
messages will be transmitted on the global MIDI channel.
Assign Type [No Assign/Note/Control Change]
This specifies the type of message that will be assigned to the trigger pad. You
can disable the pad (no assignment), or assign a note message or a control
change.
Pad Behavior [Momentary/Toggle]
You can choose one of the following two types of behavior for the trigger pad.
● Momentary The Note On or On Value will be transmitted when you press
the trigger pad, and the Note Off or Off Value will be transmitted when you
release it.
● Toggle The Note On or On Value will be transmitted alternately with the Note
Off or Off Value each time you press the trigger pad.
● Note Number [C-1...G9/No Assign]
This specifies the note number of the note message that is transmitted.
CC Number [0...127/No Assign]
This specifies the control change number of the control change message that
is transmitted.
On Value [0...127]
This specifies the value of the message that is transmitted when the trigger
pad turns on.
Off Value [0...127]
This specifies the value of the message that is transmitted when the trigger
pad turns off.
You can set this only if the assign type is “Control Change.”
6