User Manual

Setup

Operating requirements

• Apple Macintosh computer: Computer with an Intel or PowerPC processor

that has a USB port and satisfies the requirements for running Mac OS X.

• Operating system: Mac OS X 10.3.9, or Mac OS X 10.4.7 or later.

• Windows Computer: Computer that has a USB port and satisfied the

requirements for running Microsoft Windows 10/8/7/XP/Vista (a USB chipset

made by the Intel Corporation is recommended).

• Operating system: Microsoft Windows XP SP2 or later, or Microsoft Windows

Vista SP1.

• Connections and power: Connect the PMIDIPD20 to your computer with a

USB cable.

Making Detailed Settings

The following settings cannot be edited from the PMIDIPD20 itself, so you’ll

need to use the EASYPAD software Editor. You can download the PYLE

software Editor from the www.pyleusa.com

Global

Global MIDI channel

Global MIDI channel [1...16]

This specifies which MIDI channel the PMIDIPD20 will use to transmit note

messages, as well as MIDI messages that are sent when you press the button.

This should be set to match the MIDI channel of the MIDI application that

you’re controlling.

Transport MIDI Channel [1...16/Scene MIDI Channel]

Specifies the MIDI channel on which MIDI messages will be transmitted when

you operate the transport button. Set this to match the MIDI channel of the

MIDI application you’re controlling. If you set this to “Scene MIDI Channel,” the

message will be transmitted on the Scene MIDI Channel.