User Manual

www.PyleUSA.com
OPERATION
8
RESET FUNCTION
RESET button (24) must be activated with
either a ballpoint pen or thin metal object.
The RESET button is to be activated for the
following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note: When RESET button is pressed. All the
memory will be lost.
RADIO OPERATION
SWITCHING TO RADIO MODE
Press MODE button (15) to select radio mode.
SELECTING THE RADIO BAND
Press BAND button (14) shortly to select the
below band:
FM1FM2FM3WBAM1AM2
Note: Press and hold BAND button for 2
seconds and it will directly skip to the WB.
SELECTING STATION
Press button (19) or button (18) shortly to
activate automatic seek function. It will search
up/down a station automatically. Press for 2
seconds until “MANUAL” appears on the
display, and the manual tuning mode is
selected. In this mode you can turn up/down
a step frequency one by one till searched a
station. If both buttons have not been pressed
for 5 seconds it will return to seek tuning mode.
AUTO STORE & PRESET SCAN
Auto Store
Press AS/PS button (16) for 2 seconds, the
radio searches from the 87.5 MHz frequency
and checks the signal strength until one cycle
search is nished. And then some strong
stations are stored into the corresponding
preset number button. In the rst cycle in
LOCAL ON mode to receive the stronger
station. If it is less than 18 station it will search
stations in 2nd cycle in LOCAL OFF mode.
Preset scan
Press AS/PS button (16) shortly to scan
preset station. The radio is holding at
that preset number for 5 seconds with
release mute, then searches again.
MANUALLY STORE STATION & RECALL
PRESET STATION
To receive a station, Press one of the
preset button (1~6) for 2 seconds. The
current station is stored into the number
button. Shortly press the preset button
(1~6) to directly listen the station that
saved in the corresponding preset button.
In WEATHER BAND.
1 button(20): 162.550MHz
2 button(21): 162.400MHz
3 button(22): 162.475MHz
4 button(23): 162.425MHz
5 button(24): 162.450MHz
6 button(25): 162.500MHz
The next station is 162.525 MHz.
Press / button to change stations.
CD/MP3/WMA OPERATION SWITCHING
TO DISC MODE
If there is no DISC inserted in the driver:
Gently insert the DISC with the printed
side uppermost into the DISC compart-
ment until you feel some resistance. The
DISC is drawn into the driver
automatically. DISC playback begins.
If a DISC is already inserted in the driver:
Keep pressing MODE button (15) shortly
until the DISC mode display appears.