User Manual

www.PyleUSA.com
14
OPERATION
• When in USB play mode, be sure not to
remove the USB driver from the USB
interface. In DVD mode, when the disc is
playing or in the stop mode, press SETUP
on the remote control to enter setup
menu.
• When the cursor is on the topside, use
buttons to move between the
dierent pages.
• Press button to move the cursor to the
setup page below and then you can use
buttons to move between the
dierent setup options.
• Press button to display the choice list
for each setup option and then use
buttons and ENTER button to change
your selection.
SYSTEM SETUP
When you open the setup menu, you will
see the system setup page rst:
SYSTEM SETUP
1. TV SYSTEM: Change the TV mode
among NTSC, PAL and AUTO.
2. SCREEN SAVER: Change the SCREEN
SAVER on or o.
3. TV TYPE: Change the TV TYPE among
4:3PS, 4:3LB and 16:9.
4. PASSWORD: Change the PASSWORD
lock or unlock, the default PASSWORD
is “0000”
5. RATING: Change the parental RATING
among 1KID SAFE, 2G, 3PG, 4PG13,
5PG-R, 6R, 7NC-17, 8ADULT.
6. DEFAULT: Restore the system setup to
the default setup.
1. Use or cursor button to select the
items you want to program.
2. The items you selected will become
highlight.
3. Input the sequence number you want to
program by numeric buttons (0- 9,10+) on
the remote control.
4. Press OK or select “play” operation button
on the bottom area to program playback.
NOTE:
For audio CD, the play interface and operation
is similar with the Music page operation. For
details, please refer to the description of
Music page above.
USB PLAY OPERATION
On the front panel of the unit, there is an USB
interface. An USB driver can be connected
through this interface.
1. When insert USB drive into the USB
interface, the unit will read the USB
automatically.
2. If the USB have been inserted into the unit.
Press MODE button to select the USB mode.
Then the USB will be played.
Note:
When reading the USB device, please don’t
touch or take out the USB. If following the
instruction above, the unit can’t read the USB,
please check if the USB is in good condition,
or tack out the USB then insert it into the USB
interface once more.
• The main unit can only support the
standard USB-memory disc which is
approved by Microsoft.
• USB MP3 player is not a standard which
means dierent brand name or dierent
models have their own standard. So our
product cannot support every MP3 player.
• When connecting an MP3 player and there
has normal battery in the player
(non rechargeable battery), you should
remove the battery from the MP3 player then
connect it to the USB interface. Otherwise, it
may cause battery burst.
TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
DEFAULT