PyleUSA.
The round-style headunit receiver radio features Bluetooth technology allowing music to wirelessly stream from your compatible Bluetooth-enabled device. Control the audio from a distance -- all from your handheld device. Marine grade waterproof construction makes this unit perfect for upgrading your marine audio system. The input and output connectors allow you to connect external devices and speaker systems for a more convenient and selective listening experience.
CONTENTS Installation ........................................... 3 Wiring Connection .............................. 5 Operation ............................................. 6 Location of keys .................................... 6 Turn on/off the unit ................................ 7 Display time .......................................... 7 Auxiliary input ....................................... 7 Reset function ....................................... 7 Radio operation ..................................
INSTALLATION Notes: Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
INSTALLATION 4
OPERATION TURN ON/OFF THE UNIT Press button (3) to turn on/off the unit. RADIO OPERATION SWITCHING TO RADIO MODE Press MODE button (7) to select radio mode, the radio mode appears on the display together with the memory band and frequency. SELECTING THE FREQUENCY BAND At radio mode, press BND button (11) shortly to select the desired band. The reception band will change in the following order: DISPLAY TIME Press CLK button (1) to show the time.
OPERATION seconds later the 2nd “*” flash. You can press VOL+ 2 times. It shows “NUM 32* ” . Then press button (5) to confirm. It will start to play the 32’th song. But if you don’t press button (5) to confirm. It will not play the song you selected. AUTOMATIC MEMORY STORING Press BND button (11) for 2 seconds, the radio searches from the 87.5MHz frequency and checks the signal strength until one cycle search is finished. And then some stations are stored into the corresponding preset number button.
OPERATION on your mobile phone, please select “CAR KIT” and then input password “0000” if necessary. When successful paired the BT mark will be displayed on LCD. Bluetooth audio (A2DP function) Press MOD key (7) it will show “BT” on the display. Then turn on the music player of the mobile phone and playing a song. The sound will come out from the speaker of the unit. Press key to pause/play the song. Press button (4) or button (2) to select next/previous song.
www.PyleUSA.com PyleUSA.
