User Manual
7
OPERATION
SWITCHING ON/OFF THE UNIT
Press PWR button (4) to turn on the unit.
When the unit is on. Press and hold for 2
seconds to turn off the unit.
SOUND ADJUSTMENT
Press SEL button (3) shortly to select the
desired adjustment mode. The adjustment
mode will be changed in the following
order:
BAS-TRE-BAL-FAD-EQ-LOUD-LOC-STER
EO-VOL
BAS: bass
TRE: treble
BAL: balance
FAD: fader
LOUD: loudness
EQ: equalization
LOC: local
VOL: volume
By rotating the audio knob (3) it is possible
to adjust the desired sound quality.
Press and hold SEL for 2 seconds. You can
turn on/off the LOUD function directly.
EQ FUNCTION
In EQ item you can select the preset EQ
mode by rotating the audio knob (3) as
below:
FLAT---POP--- ROCK---CLASS---EQ OFF
SHOW THE TIME
Press DISP button (19) to show the time for
several seconds. After several seconds it
will return to show the information.
SET THE TIME
Press and hold DISP button (19) for 2
seconds the HH digit will flash. Press the
/ to change the hour. After that press
DISP button the “MM” will flash. Press the
/ to change the minute. Then press DISP
button to confirm.
LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated
functions on the display .
AUXILIARY INPUT
The unit can be connected to a portable
audio player through the AUX IN jack (9).
RESET FUNCTION
RESET button (16) must be activated with
either a ballpoint pen or thin metal object.
The RESET button is to be activated for the
following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note: if press RESET button (16), the unit
can’t work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the
socket on the front panel.
RADIO OPERATION
SWITCHING TO RADIO MODE
Press MODE button (4) to select radio
mode, the radio mode appears in the
display together with the memory band
and frequency.
SELECTING THE FREQUENCY BAND
At radio mode, press BAND button (17)
shortly to select the desired band.
The reception band will change in the
following order:
→FM1→FM2→FM3→WB→AM1→AM2