MODE MENU /F1 /F2 F3 F4 PLCMHD80
! To insure best use of the unit, please read the user’s manual carefully CAUTION 1. Do not use any damaged or leaking battery, if using a battery to power. 2. Do not expose this product to direct sunlight, heat or extreme humid conditions. 3. Keep the unit away from strong/direct light while using this product so as to obtain the clearest and the most colorful picture. Please use sun shade for outdoor use. 4. Please avoid heavy impacts or dropping the unit, handle with care. 5.
Features HD 1080p Picture Universal Mul -Func on Video Monitor Field Monitor: Acts as a Sub-Monitor for a Bigger Picture 7-inch Hi-Res Display Screen Lightweight, Compact & Portable Input Interface: HDMI, AV, USB, OSD Controller, Headphone Jack (3.5mm) Front Panel Bu on Control Center (4) Custom Se ngs Func on Bu ons Built-in Speaker Digital Zoom Ability Works with DSLR Cameras, Video Cameras, Digital Cameras, etc.
1. Product description 1. 1 Front view: 11 MODE MENU /F1 F3 /F2 F4 10 9 8 7 6 5 4 3 2 1 1. Power indicator light: when power on/standby, it turns red; when signal in, it turns green. 2. : Power on/off 3. F4:custom button, enter secondary menu item f(self-defined button), then self-define the function that user need 4. F3: custom button same as F4 operation 5. ^/F2: Multi button. in OSD Menu for up adjustment, it can be custom button when not in OSD, See F4. 6. v/F1: Multi button.
1.2 Rear view: 1 2 3 4 5 6 USB UPGRADE OSD Controller AV HDMI 8 _ + DC 12V 7 1. USB Update Port. 2. OSD Controller input, Can insert OSD Controller into this port, to have a remote operation on the parameters of the monitor. 3. : Earphone insert. 4. AV: AV signal input, to input the AV signal into the monitor through the assorted port. 5. HDMI: HDMI (High Definition Multimedia Interface) signal input. _ 6. DC 12V+ :DC power input interface, pole of the power should match the image. 7.
1.4 HDMI Lock 1. HDMI locking plate 2. Locking screw 1 2 To use HDMI locking plate to lock the plug of HDMI cable, then put the locking plate close to the monitor, and finally bolt the locking screw to lock the plate with the monitor, As the picture below (arrow direction) 1.
1.6 Battery Plate Use the battery plate and install on the back of the monitor, you can assemble the corresponding battery to power the monitor. The Battery Plate included is pictured below: LP-E6 • LP-E6 battery plate for batter of canon DV: Canon LP-E6 Remark: Different battery clips are compatible with, and attach to the back of the display monitor. This system only includes the clip listed above, but you may be able to purchase different and compatible battery clips from your camera’s retailer.
2. Operation instruction Before setting the menu functions, please make sure the device is connected correctly, Power on the unit, switch the dial to the ON position. According to the input signal, make sure to adjust the display’s input to display the proper display on the LCD screen. 2.1 Button instructions: : Power on/off MODE: Signal Switch Button MENU: Menu button F3.
• Pic. Mode: Standard, dynamic, downy, user When select”user”, it could according to the practical situation to adjust the image of brightness, contrast, saturation, sharpness. • Brightness: To adjust the image’s brightness. • Contrast: To adjust the brightest and darkest ratio of the image, please note the sense of picture when adjust, proportion too large or small, will make the picture lose the color of showy. • Saturation: To adjust color concentration.
• Language: language for OSD: Chinese / English. • Aspect Ratio: To change the display to ratio panoramic view, automatic, just scan, zoom 1, zoom 2, 16: 9, 4:3. • NO Signal: Color options of screen background when no signal: black screen, white screen, red screen, green screen, blue screen. • OSD Trans.: To adjust the level of transparent. • OSD H: To adust the OSD position in horizontal. • OSD V: To adust the OSD position in vertical. • Camera Mode: the monitor video has real-time images.
Function Center Marker Off Safe frame Off Image Freeze Off Image Flip Off Check Field Off P2P Off Focus Assist Off • Center Marker: To set centre mark (cross mark) display. • Safe frame: To adjust screen marker (off, 96%, 93&, 90%, 85%, 80%, 2.35:1). • Image Freeze: the current picture still (capture function). • Image Flip: The U/N, L/R of the image around flip. • Check field: Color, balck and white/monochrome switching, to switch image color, black and white, monochrome (red, green, blue).
3. Technical parameters Panel size Panel type Resolution Backlight Dot pitch Display ratio Brightness Contrast ratio Response time Viewing angle Input signal Video color system HDMI support format Headphone output Input voltage Power consumption Unit size(mm) Unit weight Installation method Working temperature Storage temperature IPS LCD 7.0 inch IPS LCD 1280X800XRCB=3072000 Pixels LED 0.11775(W) x0.11775 (H) 16:10 400 cd/m2 800:1 25ms 89°/89° (L/R) 89°/89° (U/D) Video/Audio/HDMI PAL-4.43 / NTSC-3.
