User Manual

12
OPERATION
10) Playback in RPT
When playing video/audio content, press the
RPT button to select RPTONE/RPT DIR/RPT
ALL.
RPTONE: Repeat the same file.
RPT DIR: Repeat all the file of the folder.
RPT ALL: Repeat all file of the USB.
11) Playback in Image mode
When displaying the root menu,
Press the direction buttons to select your
desired FOLDER, then press the ENT or
button to open the FOLDER, or play the
selected file. When displaying the root menu,
you can also use the number buttons to select
the serial number of the file and play the file.
During IMAGE playback, press one of the
/ buttons to change the angle of viewing
picture that is displaying as follows:
: 90 degree cw; :90 degree ccw;
During IMAGE playback, press the
button to Pause playing, Press button
return to the folder.
*During IMAGE playback, the following
buttons are not available: RDM, INT.
 AV IN OPERATION
Switching to AV IN mode
The AV INPUT jacks is on the back side. When
you connect an audio/video signal through the
AV input. Press MODE button or
you can choose from the main menu to select
AV in mode.
The main menu of the AV IN mode:
 OTHER FUNCTION
1. Equalization
Repeatedly press EQ button on the remote
control to select the equalization mode. There
are four kinds of mode as below:
CLASSICROCKJAZZPOPEQ OFF
2. MUTE
Press MUTE button to mute the audio output.
Press it again to recover output.
3. LOUD
Press and hold LOUD button on the remote
control to turn on/off the LOUD function.
4. SEL menu
Repeatedly press SEL button on the remote
control will show the SEL menu as below:
Bass---Treble---Balance---Fader---EQ---Loud
---Brightness---Contrast---Hue---Saturation---
Sharpness---Vol
In every item you can use / / / button