MOBILE AUDIO SYSTEM PATVR14 USER MANUAL
CONTENTS Pre-pair for Bluetooth operation ......... 13 Paring ................................................ 13 Bluetooth audio (A2DP function)........ 13 Remote control.................................... 14 Performance ........................................ 16 Installation ........................................... 3 Mounting.......................................... 4 Wiring Connection .............................. 5 Operation ............................................. 6 Location of the keys ..
INSTALLATION Notes: Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
INSTALLATION 4
WIRING CONNECTION ISO CONNECTION 5
OPERATION LOCATION OF KEYS 1. BAND button 2. MODE button/BT 3. VOL + 4. VOL 5. Play/pause button/SAVE 6. TFT 7. Power button 8. MUTE button 9. Seek down button 10.
OPERATION POWER ON/OFF THE UNIT previous menu.) Press the button to turn on/off the unit. SYSTEM SETTINGS MAIN MENU Press and hold SETUP/ENTER button on the remote control for 2 seconds, then Press “ ” button on the remote control will enter this MAIN menu (see below picture). Press “ “ / / ”button on the remote control or ” on the front panel to select OSD Language/Time/Radio Area/Beep. Then press ENTER/SETUP button button of the front panel to enter corresponding item.
OPERATION 3). Radio Area Press “ / ”button on the remote control to select Europe/America. 4).Beep Press “ / ”button on the remote control to select on/off. VIDEO SETTINGS AUDIO SETTINGS 1).V surround Press “ / ”button on the remote control to select Off/Concert/Church/Passive/Wide/Live. Press “ Press “ ” button on the remote control or “ BND button on the front panel to exit to ratio/Adjust. previous menu. button to enter corresponding item.
OPERATION 2. SELECTING THE FREQUENCY BAND Shortly press BAND button to select desired In every item using “ / ” button to adjust band. The reception band will change in the and press ENTER/SETUP button to exit. following order: FM1FM2 FM3 AM1 (MW1) AM2 (MW2) Default SETTINGS When selecting default function, Press ENTER/SETUP button will reset to default You can select Europe or American Band in (Same as below RESET function). Radio Area item of the SETUP menu. 3.
OPERATION the 87.5 MHz frequency and checks the signal it will increase the receiving sensitivity when strength until one cycle search is finished. And you search the station. That means you can then some strong stations are stored into the receive more stations. Also you can turn it corresponding preset button. In the first cycle it on/off in SEL menu. will in LOCAL mode to receive the stronger USB OPERATION station. If it stored stations is not full the preset 1) Playing USB button.
OPERATION for video files. : Tap it to pause playback : Tap it to stop playback : Tapping one of them can switch on between the speed levels of fast backward or forward (Except image mode). : Tapping one of them can select next or previous chapter/track. Press “ ” button to select desired song / 6) Select Chapter/Track with number buttons then press ENTER/SETUP button to play.
OPERATION 10) Playback in RPT The AV INPUT jacks is on the back side. When When playing video/audio content, press the you connect an audio/video signal through the RPT button to select RPTONE/RPT DIR/RPT AV input. Press MODE button or ALL. you can choose from the main menu to select RPTONE: Repeat the same file. AV in mode. RPT DIR: Repeat all the file of the folder. The main menu of the AV IN mode: RPT ALL: Repeat all file of the USB.
OPERATION to adjust the desired value. - Bluetooth audio (A2DP function) Press MOD key to switch to PHONE mode. Then turn on the music player of your mobile phone and playing a song. The sound will come out from the speaker of the unit. Press PAU key of the front panel to pause/play the song. Press button or button to select next/previous song. 5. SCAN In RADIO mode.
REMOTE CONTROL 14
REMOTE CONTROL 1. MODE 2. POWER 3. BAND: 4. ENTER/SETUP 5. / , 6. EQ 7. 8. SEL 9. INT Press INT to INTRO each file. Press again to stop intro function. 10. 11. / Press to change the source. Press it to turn the unit ON or OFF To select FM1, FM2, FM3, MW1, MW2 radio bands. Long press to return to previous menu, short press to enter next menu; In case of MENU mode, / , / buttons serves as cursor buttons to select item left/right, ahead/back.
PERFORMANCE Tuning range Sensitivity S/N ratio Stereo separation Freq. Response FM AM MP3/WMA USA:87.5~107.
