PWPSB2402 24” Powered ATV/ UTV Soundbar System Built-in Class D Stereo Power Amplifier w/ Wireless BT Streaming and LED Lights
Installation 1. Stick the 45X10X0.5mm non-slip rubber strips (2 pieces) on the bottom of the clamps, then insert them into the slider. 2. Align the screw holes at the bottom of the clamps with the positioning holes that have been made in the slider and lock the M5X24mm screws and M5 spring washers to fix the clamps. 3. Stick 48X30X2mm rubber non-slip pads on clamps. 2 www.PyleUSA.
4. Installing on the cage bar of 1.5” to 2.0”. Wrap the rubber strip on the cage bar to prevent being scratched. And then, press the aluminum rings on the rubber strip. The screw mounting holes of the aluminum ring are aligned with the base. • 2” Cage bar are installed using 2” aluminum ring and 120X14X1mm rubber strip. • 1.875” Cage bar are installed using 2” aluminum ring and 130X14X2mm rubber strip. • 1.75" Cage bar are installed using 1.75" aluminum ring and 120X14X1mm rubber strips. • 1.
6. Complete the installation, the PWPSB2402 will be under the cage bar as shown in the figure. 7. The installation steps of the aluminum ring below are the same as above, after complete installation, the PWPSB2402 will be above the cage bar as shown in the figure. BT Pairing & Connection *Power 1. Press and hold for 3 seconds for power on and off, when the powered ON, the background led will be white. *BT Pairing 1. Turn on the BT, and search for “PyleUSA” to be paired.
Parts List Non-slip rubber pad (120 x 14 x 1mm) 4 PCS Non-slip rubber pad (120 x 14 x 4mm) 4 PCS Non-slip rubber pad (130 x 14 x 2mm) 4 PCS Clamp base 2 PCS Non-slip rubber strip (45 x 10mm) 4 PCS M5x24mm screw 2 PCS Spring washer for M5 screw 2 PCS Non-slip rubber pad (48 x 30mm) 2 PCS Aluminum ring 1.
Auto Connection 1. When the device is out of receiving distance range, the BT will disconnect automatically, and the BT indicator led will be flashing as blue. 2. When the device is back to the receiving distance range within 10 minutes, the BT will be auto connected, and the BT indicator led lights constantly. 3. If within 10 minutes, the device does not connect to the BT, then it needs to re-do BT connection steps. 4.
Features: • Built-in Class D Stereo Power Amplifier • (4) 3.5” Mid-bass Drivers with Y35 Ferrite Magnets • Forward-firing Speakers for Maximum SPL and Sound Staging • (2) 1” PEI Dome Tweeters • Built-in BT Technology • Supports A2DP Audio Streaming • 3.
Questions? Comments? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.
