www.pyleaudio.
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS............................................................................... 2 BEFORE USE ................................................................................................................... 4 COPYRIGHT .................................................................................................................... 4 BLUETOOTH CONNECTIVITY ...........................................................................................
curtains and the like. 9. Install the apparatus in accordance with the manufacturer’s instructions. 10. Clean the cabinet with a soft cloth slightly moistened with a mild detergent solution. Do not use strong solvents which may cause unpredictable damage to the apparatus. 11. Do not use attachments/accessories not recommended by the product manufacturer as they may be hazardous. 12. Power-supply cords should be routed so that they are not likely to be trapped in any way.
2. If this product develops trouble, contact qualified service centers, and do not use the product in defective states. BEFORE USE 1. Choose unit installation location carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibrations and excessive dust, cold or moisture. Keep away from sources that hum, such as transformers or motors. 2. Do not open the cabinet as this might result in damage to the circuitry or electrical shock.
6. A few seconds later your Bluetooth connection is success. And you can hear a voice. ENJOY MUSIC FROM AN EXTERNAL DEVICE 1. After get your external device paired, press the button, then the music will play. NOTE: It will not play automatically without pressing the button. 2. Press and hold the VOL- button to reduce the volume; 3. Press and hold the VOL+ button to increase the volume; 4.
Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
SPECIFICATIONS AMPLIFIER section Output Power Frequency Response SPEAKER SYSTEM section Type Impedance …………. …………. 1-way 4 Ohm Output Power …………. 2 X 15W GENERAL Power Requirements …………. Dimensions (H x W x D) USB Charge Standard Accessories …………. …………. …………. The built-in lithium battery voltage 3.7V Lithium battery capacity:1400mA 2.76 x 8.5 x 2.56 Inches without hand buckle USB charge voltage 5V USB Cable AUX IN Cable …………. ………….