PWMA1216BM
SPECIFICATION FEATURES 1. Versatile Public Address Microphone & Speaker 2. Bluetooth Wireless Music Streaming Ability 3. Lightweight, Portable & Powerful 4. USB Flash & SD Memory Card Readers 5. MP3 Digital Audio File Compatibility 6. Built-in Rechargeable Battery, 10+ Hour Operation 7. 1/4'' Microphone Input Jack 8. Audio (3.5mm) Output, Connect External Speakers 9. Full Range Stereo Sound Reproduction 10. Impressive Bass Response 11. Echo, Bass, Treble Audio Configuration Controls 12.
OPERATION OF BELT PACK TRANSMITTER 1. Open the battery cover and install a fresh 9V battery, observing the correct polarity. And then close the cover. 2. Plug in either the clip-on or the headset microphone. 3. To use the clip-on MIC, attach it at chest level. Do not place too close to the mouth - a distance of about six inches usually works best. To use the headset MIC, place it on the head and adjust the MIC boom so that the MIC is about one inch to the side of the front of the mouth.
OPERATION ON AC POWER Plug one end of provided AC cord into the AC input jack on the right side of the amplifier. Then plug the other end of AC cord into AC power outlet. Turn on the unit using the power/volume switch. NOTE: To avoid damaging your unit, make sure AC power is same as that marked near AC input jack) OPERATION ON DC POWER This unit can be powered also using external 12V DC power. Connect external 12V DC power to DC input jack on top panel of the amplifier.
