Instruction manual

Product Specifications:
Bluetooth version Bluetooth V4.0 +EDR A2DP and AVRCP
Operating range (maximum)
32 feet (The transmission distance
changed depending on the environment
where the product is used.
Headset Impedance / Output:
30Ω 0.02mm, dia. 10mm x 2
Power supply
Built in Li-Polymer
Battery Capacity
3.7V / 80mAh
Current consumption:
<10uA
Continuous standby time: #
180 Hours
Continuous transmission time: #
8 hours
Continuous talk/Listening time: #
5 hours
#The actual continuous standby/transmission times may become shorter than those in the specifications
depending on the environment or conditions for keeping/using the unit, etc.
#Batteries are consumables. The battery service time gradually decreases after the charging and discharging
cycles, even if the batteries are used properly.
#The battery performance deteriorates quickly if the unit is kept under high temperature conditions. Please keep
the unit in a cool, well-ventilated location, away from direct sunlight.
Operating Temperature:
10 °F to 104°C
Operating humidity range:
20-80% (no condensation)
Product size:
1.7"(W) x 2.5" (H) x 0.35"(D) inch
Weight:
0.81 oz.
Waterproof performance:
IP46
Number of devices that can be
registered
8
How to place the headset on your ears:
1. The headset has been marked for the right and left side. Ensure you have the correct side.
2. Hang the neck band over the back of your ears.
3. Place the headset section horizontally and gently twist the headset into your ear unit you feel
comfortable and snug fit into your ear.
4. And then turn up and place the hook behind your ear
5. Do the same step on the other ear.
6. If you feel uncomfortable or it doesn’t fit snug, you might try to change another size of earbuds.