PVTT2UWD/PVTT2UBK
IMPORTANT SAFETY INSTRUCTIONS When using electrical products, always follow basic precautions: 1. Read Instructions-All safety and operating instructions should be read before operated. 2. Retain Instructions-Safety and operating instructions should be retained for future reference. 3. Follow warnings-All warnings on the product and in the manual should be adhered to. 4. Follow instructions-All operating and user instructions should be followed. 5.
qualified service personnel under the following conditions: a. If the power-supply cord or plug is damaged. b. If liquid or objects have fallen into the product c. If the product has been exposed to rain or water. d. If the product does not operate and you have followed the manual for troubleshooting. e. If the product has been dropped or damaged in any way, and the product exhibits a distinct change in performance may indicate a need for service and/or repair. 18.
CAUTION: To prevent shock, match wide blade of plug to wide slot, fully inserted UL Warning: Do not expose the apparatus to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. BEFORE USE 1. Choose a safe location and avoid placing the unit in direct sunlight or near heat source. 2. Avoid locations subject to vibrations, excessive dust, cold or moisture. 3. Do not open the cabinet as this may result in electrical shock.
PLAY A RECORD 1. Open the suitcase 2. Connect the USB line with Adapter then to an electrical outlet (120V-60Hz);Or make the rechargeable battery has been full recharge. 3. Place a record on the turntable and set the player speed to match the record speed (33/45/78). NOTE: when playing a single (a 45 rpm record) and/or records with large centre holes, use the 45 rpm adapter. 3.
RECORD YOUR VINYL TO YOUR WINDOWS PC Audacity Recording Software Your USB turntable is compatible with any recording software that supports USB Audio devices. We have included Audacity, which is free software, distributed under the General Public License(GPL), However you may prefer to use a variety of 3rd party software packages.
4. Press Stop 5. SAVE YOUR FILE NOW by clicking on ‘File’ -> ‘Save Project’. Select the destination and file name for the project and click ‘Save’. 6. You have completed the recording process. (See Figure 2) Figure 2: Recording Sample Adjusting Your Audio Level (Optional) 1. Select your entire recording by selecting “Edit”, then “Select…”, then click “All”. You can also use Ctrl+A on a PC or APPLE+A on a Macintosh to quickly select all.
2. Select the “Effect” menu and choose the desired effect. There are various types of effects which are described further in the software’s help section as well as on the web (See Figure 4). b. Normalize should be used to have the correct volume on the recording.
Cleaning Your Audio (Optional) 1. Drag the cursor over a portion of the audio track which contains noise. We recommend using the beginning or the end of a track where there is no music and only noise. (See Figure 6) 2. Select “Noise Removal” from the “Effect” drop down menu to bring up the “Noise Removal” window. (See Figure 7) 3. Click “Get Noise Profile”. The Noise Removal window will now close automatically. 4. Select the entire track of audio you wish to remove noise from.
TIPS FOR BETTER TURNTABLE PERFORMANCE 1. When opening or closing the turntable cover, handle it gently, gripping it either at the centre or at each side. 2. Do not touch the needle tip with your fingers; avoid bumping the needle against the turntable platter or record edge. 3. Frequently clean the needle tip-use a soft brush in a “back-to-front” motion only. 4. If you must use a needle cleaning fluid, use very sparingly. 5. Gently wipe the dust cover and turntable housing with a soft cloth.
