User Manual

USB and SD RECORDING

Recording USB to SD or SD to USB

Deleting tracks from the USB disk or SD

card

A Push the POWER button to turn the unit on. A Push the POWER button to turn the unit on.

B Insert USB device and SD card to the unit.

C Set the function knob (CD/USB / SD/AUX-PH/ TUNER/BT)

to USB/SD.

D Start playback of the USB/SD at the point you want to

start recording (Long press PLAY/PAUSE button to

choose between USB and SD card).

B Insert USB device or SD card to the unit.

C Set the function knob (CD/USB-SD/AUX-PH/TUNER/ TAPE) to

USB/SD.

D Select the track you would like to delete, and begin the

playback.

E Press and hold the “RECORD/ERASE” button for

approximately two seconds, and “ONE” will blink on the display. Press

SKIP-/SKIP+ to choose the tracks you would like to delete

(ONE/FOLDER/ALL). Then press “RECORD/ERASE” button again, the

track will be deleted, and the next track will play.

E Press the RECORD/ERASE button to start recording.

Press the SKIP-/SKIP+ to choose the content you want to

record (ONE/FOLDER/ALL). Press RECORD/ERACE

again to confirm and start recording.

F Press the STOP button to stop the recording process,

and “END” will be shown on the display.