User Manual

www.PyleUSA.com
15
- Please make sure your USB drive or USB HDD is the right format
- it doesn’t support exFAT format. Please format them in your computer,
and FAT32 is the best choice. Please use “safety remove” option to
remove your USB drive, don’t just plug out directly without “safety
remove” option. Sometimes maybe you still nd your recorded video
with problems if without “safety remove”.
- Usually USB drive will ash seconds (If your USB drive includes LED
inside and if none no LED inside) when you just plug it into PVRC52
device, then turn o. And it will ash after you press REC button to start
recording, if not, it means not recording.
- For recording PS3 with YPBPR (Component video), please set following
the option in manual.
3. How to update the latest rmware?
- Copy the rmware le (jedi.img) into USB drive, power o the device
(unplug power jack), plug USB drive to device, power on, the indicator
will ash 7~8 seconds, and become green, check USB drive and the
jedi.img le is disappeared, it means the update is nished.
4. How to reset the recorded les name?
- After long time using, you will see the number of recording le become
too big, for example Encode_1080P_234, but you want it be start from
Encode_1080P_0, to do it you just keep press record button (before
power on), then plug the power jack to power on the device, after 3
seconds, the le number will start from 0.
5. How to record video from HDMI port of my computer?
- Please connect all the cables following the HDMI connection in
manual.
- If you have an extra monitor and can display the video correctly please
disregard video setting.
- If you have no extra monitor, please check your display selection on the
computer. And it’s ok if you nd the picture as below: