User Manual
ww w.PyleUSA.com
16
CONNECT WITH EXTERNAL AUDIO SOURCE EQUIPMENT
This equipment can send its various information via channel10, including:
trigger notes, force, hi-halpedal performance and status, etc.
Note: The song replaying and metronome information can not be sent.
Use the external audio sequencer to record the performance
1. Connect external audio sequencer or PC via MIDI OUT or USB.
2. Set the equipment of channel 10 in the audio sequencer or in the sequence
software, and than start recording.
3. Play the pads.
4. Stop the performance and recording, and listen to the performance.
TROUBLESHOOTING
AUDIO SOURCE SPECIFICATION
• Max polyphony: 32
• Drum kits: 10 preset drum kits: KIT01-10
• Voice: 108 voices (DRUMS, PERCUSSION, SFX)
• Audio sequencer: DEMO SONG 10
• Recording: realtime recording, but can not be saved.
• Tempo: 30bpm-280bpm
• Display: three LED (red or green)
• Connection: Phone stereo out connector (l/8"), AUX IN stereo connector (1/8"),
Audio output connector (1/4" Llmono),
• MIDI OUT
• Power supply: DC 12V internal + external
**The specication is subject to change without prior notice.**
PROBLEM REASON
No sound Please conrm the volume knob is not turned o
Pad has no sound
1. Conrm the pad connection is correct.
2. Conrm the pad volume is not set to 0
Metronome has no sound Conrm the metronome volume is not set to 0
DEMO SONG has no sound Conrm the metronome volume is not set to 0