Instruction manual

IT WILL INDICATE PROGRAM NO. AND DIGITS FOR TRACK NO. TO BE PROGRAMMED.
3. SELECT A DESIRED TRACK BY PRESSING SKIP
OR BUTTONS (16,17).
4. PRESS THE “ PROGRAM ” BUTTON TO STORE THE TRACE INTO MEMORY.
5. REPEAT STEPS 3 AND 4 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY.
6. WHEN ALL THE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS CD “ PLAY/PAUSE/STOP ”
BUTTON (19) TO PLAY THE DISC IN ASSIGNED ORDER.
7. TO CANCEL THE PROGRAMMED FILE, PRESS “STOP” BUTTON ON REMOTE HANDSET UNTIL “ PROG
“ INDICATOR IS DISAPPEAR ON LCD DISPLAY (2)
E-3
PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA OR MEMORY CARD
CONNECTING
THE SYSTEM IS ABLE TO DECODE AND PLAYBACK ALL MP3 /WMA FILE WHICH STORED IN THE MEMORY
MEDIA WITH USB CONNECTING PORT OR SD/MMC MEMORY CARD.
1. SET FUNCTION SELECTOR (3) AT CD/USB/SD MODE AND THEN PRESS SOURCE BUTTON (7) TO SELECT
“ USB OR CARD” MODE.
2. PLUG-IN THE USB PLUG WITH THE FACE UP & MAKE SURE IT
GOING INTO COMPLETELY OR INSERT THE MEMORY CARD IN
THE DIRECTION OF THE ARROW AS SHOWN IN THE LABEL ON
THE UNDERSIDE OF THE MEMORY CARD SLOT COVER. INSERT
STRAIGHT WITHOUT BENDING.
 CONNECTING THE USB UPSIDE DOWN OR BACKWARDS
COULD DAMAGE THE AUDIO SYSTEM OR THE STORAGE
MEDIA (USB THUMB DRIVE / SD/MMC CARD). CHECK TO BE
SURE THE DIRECTION IS CORRECT BEFORE CONNECTION.
3. THE SYSTEM WILL START READING THE STORAGE MEDIA AUTOMATICALLY AFTER CONNECTING, AND
LCD DISPLAY (2) WILL SHOW THE TOTAL NUMBER OF MP3/WMA FILES AND TOTAL NUMBER OF FOLDER
BEING DETECTED.
4. REPEAT THE SAME PLAYBACK PROCEDURE AS PLAYING CD/MP3 DISC AS ABOVE
REMARK
- THE SYSTEM CAN DETECT AND READ THE FILE UNDER MP3 AND WMA FORMAT ONLY THOUGH THE
USB SOCKET OR SD/MMC CARD.
- IF CONNECT THE SYSTEM TO MP3 PLAYER VIA THE USB SOCKET, DUE TO VARIANCES IN MP3
ENCODING FORMAT, SOME MP3 PLAYER MAY NOT BE ABLE TO PLAY VIA THE USB SOCKET. THIS IS
NOT A MAUFUNCTION OF THE SYSTEM.
- USB PORT DOES NOT SUPPORT CONNECTION WITH USB EXTENSION CABLE AND IS NOT DESIGNED
FOR COMMUNICATION WITH COMPUTER DIRECTLY.
LISTING TO TAPE
GENERAL OPERATION
CASSETTE PLAYBACK : THE SYSTEM WILL START THE PLAYBACK AUTOMATICALLY AFTER INSERTING
OF CASSETTE TAPE
STOP AND EJECTION : PRESS THE “ TAPE FORWARD / EJECT “ BUTTON COMPLETELY INWARDS
AND THE CASSETTE TAPE WILL BE EJECTED THOUGH THE CASSETTE DOOR
COVER. THE “ TAPE FORWARD / EJECT “ BUTTON WILL KEEPING AT LOWEST
HEIGHT POSITION.
FAST FORWARD : PRESS THE “ TAPE FORWARD / EJECT “ BUTTON HALF INWARDS DURING
PLAYBACK MODE, THE TAPE WINDING FORWARD DIRECTION. THE “ TAPE
FORWARD / EJECT “ BUTTON WILL KEEPING AT MIDDLE HEIGHT POSITION.
SLIGHTLY PRESS THE “ TAPE FORWARD / EJECT “ BUTTON AGAIN TO RESUME
NORMAL PLAYBACK. THE “ TAPE FORWARD / EJECT “ BUTTON WILL RESUME
TO THE HIGHEST POSITION.