Operating instructions

PROGRAM RECORDING
This feature allows you choose the desired tracks to be recorded at one time.
Program tracks you want to record, procedures are the same as those of
program playback step 1-4 on page 10. Program indicator remains ‘On’.
Plug U Disc into USB slot. Press PLAY/PAUSE button to begin play the
programmed tracks, press RECORD button twice to start record. ‘rEC’
indicator flashes. The display will show the playing track number, ‘Cd’ and
folder name of the track selected. For example: ‘001'’Cd’’F01'.
Press SKIP FWD. or SKIP REV. button to choose the desired on in the
programmed tracks.
Press STOP button once will cancel the record function and ‘rEC’ indicator
goes ‘Off’. Otherwise the recording will be from the first track to the end of the
programmed tracks.
1)
2)
3)
4)
5)
After the last track has been recorded, the player stops and the display
shows the total number of tracks on the disc and ‘Cd’ 5 seconds in turn. The
program sequence has been canceled in the memory. The program indicator
goes ‘Off’.
PHONO RECORDING
Rotate the VOLUME control clockwise and set the volume to a low level.
Set the function selector(AM/FM/PH/CD/USB/TA) to PH position. ‘PHO’ will
be shown on the display.
Plug U Disk into USB socket. Place the record on the turntable center and
play the record. Press RECORD button twice to enter into record mode. The
player will re-start play the first point of the track to be selected. ‘rEC’ will be
shown on the display and ‘rEC’ indicator remain flash. The recording will be
from the first to the end of the phono record.
1)
2)
3)
Press STOP button will cancel the record function. Press STOP button once
will stop RECORD mode, and ‘rEC’ indicator goes ‘Off’, press twice will stop
CD playing.
5)
NOTE: When the player Playback MP3 disc, the display will show ‘Cd’.
start to record the playing track into USB, the track will be re-start play from
the beginning of the selected track. ’rEC’ will be shown on the display and
‘rEC’ indicator flashes.
4)
Press STOP button once will stop RECORD mode, and ‘rEC’ indicator goes
‘Off’. ‘PHO’ will be shown on the display and phono record will continue to
playback.
15
NOTE: You may refer to playback of USB to play the recorded tracks in USB.