Operating instructions

IMPORTANT!!
TO PROTECT THE TURNTABLE FROM DAMAGE DURING
TRANSPORTATION, A SILVER TRANSIT SCREW IS LOCATED AT THE
UPPER RIGHT OF THE TURNTABLE PLATFORM.
BEFORE PLAYING, PLEASE USE A SCREWDRIVER
TO TURN THE TRANSIT SCREW IN CLOCKWISE
DIRECTION (SCREW GOING DOWN) COMPLETELY
TO UNLOCK THE TURNTABLE.
TO LOCK THE TURNTABLE AGAIN FOR
TRANSPORTATION, PLEASE TURN THE SCREW IN
COUNTER-CLOCKWISE DIRECTION.
During CD or MP3( in CD or USB mode) playback, repeatedly press SKIP
REV.(DN/FR) or SKIP FWD(DN/FF) buttons to skip to higher or lower number
tracks. When the desired track number appears on the display release the
buttons and playback will begin on the desired track.
To rapidly search forward or backward within a track to locate a specific musical
passage, depress and hold either the SKIP REV.(DN/FB) or SKIP FWD.(UP/FF)
buttons. The player will move forward or backward at high
SKIPPING TRACKS AND HIGH SPEED MUSIC SEARCHING
Set the turntable Speed Selector to the appropriate speed, 33, 45, or 78
RPM. If you are playing 45 RPM singles , place the 45 RPM adapter on the
centre spindle.
4)
,
Place your record on the centre spindle.
5)
Raise the CUE lever to lift the tone arm off its rest. Move the tone arm to the
edge of the record. The turntable starts automatically.
6)
Adjust the VOLUME control to the desired level.
9)
When the arm reaches the end of the record, it will continue turning until
PHONO switch is pressed again.
10)
NOTE: Do not turn or stop the turntable manually. Moving or jarring the
Turntable without securing the Tone Arm clamp could result in damage to the
Tone Arm.
Make sure that you have removed the stylus cover from the stylus and have
released the Tone Arm Lock that secured the tone arm to the tone arm rest.
3)
7)
Press PHONO switch and the record will start turning.
8)
Use the CUE lever to gently lower the tone arm onto the record.
13
REMOVE THE ROUND PAPER CARD ON THE
TURNTABLE BEFORE PUTTING YOUR RECORD
ON THE CENTER SPINDLE.