Operating instructions

CASSETTE OPERATION

Note: Before inserting a tape in the player be sure that there is no excess slack

in the cassette that could become jammed in the mechanism. Refer to the Care

and Maintenance section for instructions on removing excess slack from the

cassette.

Rotate the control clockwise until a ‘click’ is heard and set the

Volume to a low level.

OFF/VOLUME

Insert your cassette into the slot located on right side cabinet, as shown in the

illustration, with the side you wish to play facing ‘up’ and the open end on the

right side.

Cassette playback begins as soon as the tape is inserted. Adjust the

OFF/VOLUME control to the desired level.

To advance the tape rapidly, depress the EJ/FF (Eject/Fast

Forward) button approximately half way. The tape will move forward

rapidly as long as the button is depressed. Normal playback will

resume when the button is released.

Set the function selector(AM/FM/PH/CD/USB/TA) to TA position, ‘TAP’ will be

shown on the display.

When the tape ends the player stops automatically. Depress the

EJ/FF (Eject/Fast Forward) button completely to remove the

cassette from the player. You may press the EJ/FF (Eject/Fast

Forward) button to stop playback and remove the cassette at any

time.

To turn the system ‘off’ , rotate the OFF/VOLUME control counter clockwise

until a ‘click’ is heard.

PLAYING RECORDS

This system includes a full-size, 3-speed, belt-drive turntable. You can play 33,

45, and 78 RPM records.

Rotate the OFF/VOLUME control clockwise until a “click” is heard, and set

the Volume to a low level.

Set the nction selector(AM/FM/PH/CD/USB/TA) to the PHONO position.

‘PHO’ will be shown on the display.

Cassette Tape

Open End