Operating instructions

PROGRAMMED PLAYBACK
This feature allows you to program up to 20 CD tracks and 99 MP3 tracks on a
disc for playback in any desired order.
Press the PROGRAM button to enter the Program mode. The program
number briefly shows ‘ P01', the Program indicator flashes.
1)
Press SKIP REV. or SKIP FWD. button to select the first track
number you wish to enter in the program memory. Example:
Track Number ‘008’.
2)
When the desired track number appears on the display, press
the PROGRAM button again to enter track in memory. The
Program number briefly show ‘P02’.
2)
3)
Repeat steps 2-3, selecting a different track number each time until you have
entered up to 20 CD tracks and 99 MP3 tracks in the program memory.
4)
Press PLAY/PAUSE button to begin programmed playback. The PROGRAM
indicator stops flashing and remains ‘ On’. Playback will begin with the first
track you programmed and will continue until the last programmed track has
played. Press SKIP FWD. or SKIP REV. button to select a specific track in the
programmed tracks.
NOTE: You may program the same track number to play multiple times in the
program sequence if desired.
After the last track has played, the player stops and the display shows the
total number of tracks on the disc and Cd 5 seconds in turn. However, the
program sequence has been canceled in the memory.
The program indicator goes ‘Off’.
5)
6)
RANDOM PLAYBACK
In CD/MP3 playback, press RANDOM button once enter into random function.
RANDOM indicator remains ‘On’. Press SKIP FWD. or SKIP REV. button to
choose the tracks in the disc randomly. Press RANDOM button again or press
STOP button to cancel RANDOM function, the RANDOM indicator goes ‘Off’.
11