User Manual

ManualsBrandsPyle ManualsDampeningFive Panels Metal Microphone Isolation Shield - Vocal Booth and Studio Recording Acoustic Panel

www.PyleUSA.com

USAGE 2

Use with oor stand (5/8 interface)

Step 1: Take out the isolation shield and all accessories on the desk.

Step 2: Take out the oor stand.

(Note: The oor stand, microphone, shock mount and pop lter is not included in

the product and the customer needs to prepare it himself).

Step 3: Combine the nut, connecting rod and adapter (the connecting rod can move

forward and backward to adjust the position).

Step 4: Install washer, screws and nut on the crossbar of the isolation shield

Step 5: Fix the lsolation Shield on the oor stand (as the picture shows)

USAGE 3

Use with oor stand (3/8 interface)

Step 1: Take out the isolation shield

and all accessories on the desk.

Step 2: Take out the oor stand.

(Note: The oor stand,

microphone, shock mount

and pop lter is not included

in the product and the

customer needs to prepare it

himself).

Step 3: Combine the nut, washer,

connectiong rod and adapter

(the connecting rod can move

forward and backward to

adjust the position).

Step 4: Fix the sound enclosure to

the oor stand with nuts and

washers.

After passing the oor stand

through the crossbar and

washer of the soundproof

cover, tighten it with a nut

the connecting rod can move

forward and backward to

adjust the position

Floor stand with 3/8

interface (not included)

Combine screw,

washer and nut

Floor stand with

5/8 interface

(not included)

Product Display

Note: The oor stand, microphone

and pop lter is not included in the

product and the customer needs

to prepare it himself.