PSLSW4 - PSLSW6 Multi-Zone Speaker Selector
PSLSW4 - PSLSW6 lets you connect up to four (PSLSW4) or six ( PSLSW6) separate pairs of speakers to your stereo receiver/amplifier. The control center is especially convenient if you have speaker sets in different rooms and want to turn them on and off independently. You can enjoy the convenience and flexibility of listening to multiple speaker pairs simultaneously.
PSLSW6 Front and Back Panels OPERATION 1. Speakers ON/OFF Button Press button to turn ON all speaker pairs. Press again button out to turn off. 2. Amplifier A/B Selector Button Press button to select amplifier A and B 3. Volume Controls Turn the control knob clockwise to increase the volume and counter-clockwise to decrease or off. 4. Speaker Connections The control center divides the power from your receiver/amplifier differently to its speaker terminals.
5. Amplifier Connections Connect the speaker output of your receiver or amplifier (100 watts max. ). If you are using a second amplifier, connect it to the B amp terminal Maximum Amplifier input • 100W RMS • 150W AVG Maximum Output per Speaker • 18W RMS • 100W PEAK • 50W AVG • 4 or 16 OHM LOAD Insert the speakers’ positive (+) wires in the positive terminals, and negative (-) wires into the negative terminals, according to the respective L (left) and R (right) terminals. PSLSW4 PSLSW6 4 www.PyleUSA.
Insert your receiver / amplifier’s positive (+) wires into the positive terminals, and negative (-) wires in the negative terminals. NOTES: • If your receiver / amplifier has more than one set of speaker Terminal (A and B), connect only one or the other to the Control center. • For the best results, we recommend 14-gauge, two conductor speaker wire (not supplied) for most connections. If you plan to locate the speakers further than 80 feet from the control center, use a heavier gauge of wire.
Speaker Sets On Impedance (Ω) A+B+C, A+B+D, A+B+E A+B+F, A+C+D, A+C+E A+C+F, A+D+E, A+D+F A+E+F, B+C+D, B+C+E B+C+F, B+D+E, B+D+F C+D+E, C+D+F, D+E+F 3.1 A+B+C+D, A+B+C+E A+B+C+F, A+C+D+E A+C+D+F, A+D+E+F B+C+D+E, B+C+D+F C+D+E+F 2.4 A+B+C+D+F 1.
What's in the Box: • Speaker Selector Technical Specs: • Power Handling: 100 Watt MAX Per Audio/Speaker Channel • Speaker Selector Type: 4-Channel • Speaker Cable Wire Support: Up to 14-Gauge (14 AWG) • Minimum Impedance: <8 Ohm • Frequency Response: 20Hz-20kHz • Dimensions (L x W x D): 16.9'' x 6.3’’ x 3.0'' -inches • Sold as: 1 • PSLSW4 Weight: 9.78 lbs. • PSLSW6 Weight: 9.55 lbs. Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.
