User Manual

www.PyleUSA.com
2
SAFETY PRECAUTIONS
Important: Do not expose this product to rain or moisture to preserve the life of your product.
Caution: Do not disassemble this unit. To prevent the risk of electric shock, do not remove cover.
Ventilation: The device should be situated so that its location or position does not interfere with its
proper ventilation. For example, the unit should not be situated on a bed, sofa, rug or similar
surface that may block the ventilation openings.
Heat: The device should be situated away from sources of high heat such as radiators or stoves.
Cleaning: We strongly suggest using a clean, dry, non-alcohol cotton swab to clean the glass surface
periodically to produce a clear image.
Non use period: The USB cord for the device should be unplugged from the computer when the unit
is left unused for a long period of time.
USB overloading: Do not overload the USB connections on your computer. If you have too many
devices connected to your computer such as a wireless mouse, media player, mobile
phone or other USB powered devices. There may not be enough power for the lm &
photo scanner to operate properly.
Servicing: The user should not attempt to service the device beyond those means described in the
operating instructions. All other servicing should be referred to qualied person.
Film Holder: The design of the lm holder follows ISO standard. In some cases the holes on the lm will
not match exactly to the alignment of the holder. This is caused by a non-standard camera.
In this case there will be a small black line on the edge of the frame that can easily be
cropped out using photo editing software.
ISO-- International Organization for Standardization
For environmental protection and energy conservation, besides in PLAYBACK and USB mode, the device
will be powered o automatically without any operation in 30 minutes of inactivity.