PSBV210WIFI Sound Bar User Manual
TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS……………………………………………………………………………………………………………....1 IMPORTANT SAFETY INSTRUCTION…………………………………………………………………………….………..2-3 FEATURES ………….…………………………………………………………………………………………………………………..3 SPECIFICATIONS………………………………………………………………………………………………………………………4 PLACING THE UNIT………………………………………………………………………………………………………..………..4 SYSTEMS CONNECTIONS …………………………………………………………………………………………….………….5 1.CONNECT POWER SUPPLY ………………………………………………………………………………………….……….5 2.
IMPORTANT SAFETY INSTRUCTIONS Warning To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Dangerous high voltages are preset inside the enclosure. Do not open the cabinet, refer to qualified personnel only. The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert user to the presence of non-insulated “dangerous voltage” within the products’ enclosure, that may be of sufficient magnitude to constitute a risk of electric shock.
9.Unplug this apparatus during lightning storms or when unused for long period of time. 10. Power source The product should be operated only from the type of power source indicated on the r ear of the unit. 11. Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or e lectric shock. 12.
SPECIFICATIONS Power Supply…………………………………………………AC:100-24V, 50/60Hz Peak RMS Output…………………………………..…………………………..300W Input Sensitivity…………………………………………………..…400mV ± 50mA S/N(A Weight)…………………………………………………………………≥80dB Channel Separated Rate (1KHz)………………………………………………≥ 40dB Woofer Impedance………………………………………………………………8ohm Tweeter and full range speaker impedance………………………………………4ohm THD (1KHz, 1W, 8Ohm)………………………………………………………≤ 0.5% Frequency Response …………………………………………………….20Hz-20KHz Dimensions (WXDXH)……………………………………………… 23.
SYSTEM CONNECTIONS 1. CONNECT POWER SUPPLY Insert the power plug into a wall socket; Make sure the voltage marked at the rear panel is same as your AC power. Do not operate with wet hands to avoid electric shock 2. CONNECT WITH PC/MP3 To listen to the sound source from PC( Computer ) or MP3 Players, connect the unit with the external device as below.
3. CONNECT WITH TV/DVD To listen to the sound source from Television and/or CD/VCR/DVD/DVR players, connect the unit with the external device as below.
FRONT PANEL FUNCTIONS BACK PANEL FUNCTIONS 1. 2. 3. 4. PC mp3 FM ANT input jack AUX 1 L+R input jacks. AUX 2 L+R input jacks DC:18V2.
REMOTE CONTROL FUNCTIONS 1. STANDY-BY : Press to turn on the unit from standby mode, Press again to turn the unit off (stand -by) 2. 3D: Press to turn on the surround sound effect, Press again to turn it off 3. MUTE: Press to turn off the sound temporary, press again to turn the sound back. 4. INPUT: Press repeatedly to select the input source as desired. 5. CH+: In FM radio mode, press to search the stored upper channels. 6. EQ:10 Mode for choose, in FM mode press choose stereo or mono 7.
HOW TO USE THE REMOTE CONTROL 1. Battery Installation: a. Slide and lift up the battery door. b. Install two “AAA” size batteries (included) into the battery compartment according to the polarity markings inside battery compartment. c. Replace the battery door BATTERY PRECAUTIONS Follow these precautions when using batteries in this device. 1. Use only the size and type of batteries specified. 2.
OPERATIONS 1. GENERAL OPERATION 1) Press the POWER button on the front panel of the unit to turn the unit to Standby mode. 2) Press the STANDBY button on the unit or remote control to power on the unit 3) Press the INPUT button on the unit or remote control repeatedly to select the input sources to USB, CARD, FM radio, Blue, AUX1, AUX2, PC as desired. 4) Hold Press the ( or ) VOL+/- buttons on the unit or press it on the remote control to adjust volume ad desired.
2. LISTEN TO FM RADIO Connect the supplied 3.5mm audio cable to FM ANT jack on the rear of the unit as the figure below. Extend the wire and relocate it to get the best reception. 1. Power On the unit ad previous procedures. 2. Press the INPUT button on the unit or remote control repeatedly until FM frequency appears on the display. 3. Press or button on the remote control repeatedly to search the specific radio stations. (To search the radio stations in auto mode.
3. SD/USD SLOT OPERATION Before connecting USB flash drive or SD cards please make sure they are in right directions. Refer following figure. 1. Power ON the unit as previous procedures. 2. Insert SD cards to SD slot or USB memory stick to USB slot. 3. Press INPUT button on the unit or remote control repeatedly until CARD or USB is displayed. To play files in USB, choose USB. To play files in SD card choose CARD. 4. The unit will play the MP3/WMA/ FLAC songs automatically. 5.
3. When mobile phone had a call the unit will show “CALL” Press to listening phone and the meanwhile you will enter hands free mode, the effect distance will be 1 meter. Hang up by repeat press the unit will resume to play music. 4. The Bluetooth of unit will auto search and connecting with the last mobile phone after power off. 5. Our products had pass BLUETOOTH QDID certificates.
MOBILE PHONE CONNNECT WITH WIFI SOUD BAR Initial connect and set WIFI Sound bar ( Only initial use device should following below steps) 1. Initial use, you will need to install the APP software. Android phone go to Google play search “MUZO player” download and install, IOS systems phone go to APPSTORE search “MUZO player” download and install it. Turn unit power ON, the WIFI systems takes about 20” to start then show “SSU-SCH” on LCD.
SET MULTDEVICE TO ONE GROUP ADD MULTDEVICE Following below steps to set multi-device 1. Click the device LIST+ 2. Add the extra device steps as same as initial add device 3. You will see the added device show under your list after you finished the steps. COMBINE MULTDEVICE OPERATES Use the finger hold press the added device and then drag up the devices will combine together.
SEPARATE MULTDEVICE The device will separate after you drag down the added device then you can play 2 different songs. Main menu slide to left&right to choose the music list and the music menu. MUZO APP MAIN FUNCTIONS Hold press music menu slide up change to music list, slide down to return.
MUZO PLAYER ICON FUNCTIONS
UPGRADE MUZO APP ON LINE The upgrade will fail if power off or WIFI off during the upgrade procedures, the device will restart after upgrade succeeded.
