User Guide

Please refer to this picture, connect the camera with the PC via the USB cable to
charge it. The battery charging status can be seen from the LCD icon (power-on
charging) or from the indicator lights (power-off charging), while charging, the LED
is shining blue, when fully charged, the LED will turn off.
II. Basic Operation
1. Power on
Press and hold the “Power on/off” button to turn on the camera; after it’s
powered on, it will enter the recording standby mode.
2. Power off
In the boot state, Press and hold “Power on/off” button for 3 seconds to
turn off the camera; the LCD will turn off.