Body-Cam User Manual PPBCM9
Warning: 1. Be careful not to use this product in strong magnetic fields, which may cause image interference or cause product fault. 2. Be careful not to direct sunlight for a long time the lens when using this product outdoors, which may cause damage to the lens of the light-sensitive devices; 3. Please do not strike or drop the product to avoid damage to the product or loss of data; 4.
I. User Guide 1.
2. LCD display ① Storage card capacity will show you how much recording time you have left before the card is full. ② Mode icon will show you what mode you have the camera in (photo, video, etc) ③ Video resolution ④ Battery capacity 3. Charge device Low battery indicator: when battery capacity is too low, the battery capacity icon at the LCD down right corner will turn red and blink and the buzzer will remind you with a beeping sound; five minutes later, the camera will shut down automatically.
Please refer to this picture, connect the camera with the PC via the USB cable to charge it. The battery charging status can be seen from the LCD icon (power-on charging) or from the indicator lights (power-off charging), while charging, the LED is shining blue, when fully charged, the LED will turn off. II. Basic Operation 1. Power on Press and hold the “Power on/off” button to turn on the camera; after it’s powered on, it will enter the recording standby mode. 2.
3. System settings Press “OK” button,enter “menu setting”. ① Video resolution: Press the “Confirm” button to enter the options list, press ‘Up’/’Down’ to choose the resolution, then press the “Confirm” button to confirm it. ② Photo resolution: Press the “Confirm” button to enter options list, press ‘Up’/’Down’ to choose the resolution, then press the “Confirm” button to confirm it.
⑧ Frequency setting: Press the “Confirm” button to enter options list, press ‘Up’/’Down’ to choose the “50”/“60HZ”, then press the “Confirm” button to confirm it. ⑨ Battery saving mode: Press the “Confirm” button to enter options list, press ‘Up’/’Down’ to choose the “on”/”off”, then press the “Confirm” button to confirm it. ⑩ Date and time: Press the “Confirm” button to enter options list, press ‘Up’/’Down’ to choose the Date and Time then press the “Confirm” button to confirm it.
5. Photo In the power on standby mode, press “Photo” button to take a picture and the picture will be save, camera return back to standby state. Each press the photo button, the camera will take one picture and save to SD card. 6. Audio only In the boot state, press “Audio” button to start recording audio, the display will be blue and there is a sound recording icon, press “Audio” button again to stop recording, the audio file will be saved to SD card automatically, display will return to standby state.
“Up”/”Down” button to choose operation, delete, format,playback card. 1. 1 Delete: Press the “Confirm” button to enter file delete mode, press “Up” / ”Down” button to choose the delete settings. 1. 2 SD card format: Press the “Confirm” button to enter format mode, press “Up” / ”Down” button to choose. 1. 3 SD card switch: Press the “Confirm” button to enter SD card switch mode, press “Up” / ”Down” button to choose the internal card or external card.
10. Remote control operation (optional function) The machine can be optional remote control, and remote operation can take pictures and video more convenient and more humane. As instructed below: ①【 】 key: Photo/Camera button. Press once to take a photo. In video mode, press the key to capture. ② 【■◆】key: Video recording button. Press once to shoot a video, press once again to stop shooting and save files. ③ 【■ 】key: Sound recording button.
III. Specification Specification Video input Built-in lens resolution up to 1920*1080 LCD display 2. 0” 16:9 TFT LCD Lens angle 170 degree wide angle Focus 0. 3~∞ CMOS sensor 1/4" Color CMOS sensor Body size 3.26'' x 2.6'' x 1.
IV. Troubleshooting and handling Device won’t turn on 1. Please connect the charger to equipment, charging 2 hours later, then check the problem; 2. Please check the charger and the connecting line is normal; 3. Please press the reset key to restore the device to factory settings, and then check to the problem; 4. If it does not resolve the problem, please contact customer service staff to return the factory repair.