User Manual

www.PyleUSA.com
5
• Video Delay: O, On
• Motion Detection: O, On
• Photo Size: 36M, 21M, 16M, 12M, 10M, 8M, 5M, 2M
• Continuous Shoot: O, 2 sheets, 3 sheets, 5 sheets, 10 sheets
3. System parameters setting list as below:
• Volume: O, Low, Medium, High
• Screen Saver: O, 1 Minute, 3 Minutes, 5 Minutes
• Auto Power O: O, 3 Minutes, 5 Minutes, 10 Minutes
• Auto night vision: Manual, Auto
• Frequency: 50Hz, 60Hz
• Date/Time: YYYY/MM/DD, HH/MM/SS. Press UP/Down button to select correct
date and time, press OK button to conrm each gure, after date and time
xed, press Menu button to get back to System parameters setting list.
• Language: English, Traditional Chinese, Simplify Chinese, Japanese, Korean,
Russian
• ID setting: 6 gures ID number. Press UP/Down button to select correct each
gure and conrm by pressing OK button, after ID number is xed, press
Menu button to get back to System parameters setting list.
• Format: Cancel, OK
• Default Setting: Cancel, OK
• Version: version number
Other features:
• Torch light: short press “Up/Torch” button to turn on/o torch light.
Torch light is for using in dark situation to add more light.
• Laser pointer: short press “Power” button to turn on/o laser pointer.
Laser pointer can show the direction where lens is recording.
TROUBLE SHOOTING AND HANDLING
1. Camera cannot boot.
• Please charge camera battery for more than 2hours rst then try to turn on
camera again.
2. Camera cannot respond.
• Please press reset button for 2seconds then restart camera.
3. Device failed to connect to computer.
• Please change to another USB port on computer to connect the camera or
change another USB cable.
Note: If above solutions cannot solve the problems, please contact customer
service sta to return for factory repair.