User Manual
www.PyleUSA.com
4
TAKING A PHOTO
1. When the camera is in Recording Standby Mode or during Video Recording
Mode, press the “Photo” button to take a photo.
2. The LED Status Indicator will ash green once if take a photo in Recording
Standby Mode. There is photo capturing sound when taking a photo.
FILES PLAYBACK
1. Press and hold the “Audio/Playback” button until the camera enters into
Playback Mode.
2. To play the currently recording le, press the “OK” button again.
3. To play another le, use the “UP” or “Down” button to cycle through the les.
Press the “OK” button when you have found the le to play it.
EXIT PLAYBACK MODE
1. To exit the Playback Mode, long press the “Audio/Playback” button.
2. The camera will return to the Recording Standby Mode.
CHARGING BATTERY WITH USB CABLE
1. Connect a USB cable with a compatible connector to a computer/wall charger.
2. Connect the USB cable to the USB port on the body camera.
BATTERY STATUS ICONS
Low Power Not Fully Charged Fully Charged
When charging battery while camera is power o, the LED Status Indicator will
light up red. When the battery is fully charged, the red LED Status Indicator will
turn o.
CONNECT TO PC
Connect to PC via mini USB cable, on camera LCD, it will display “Connected
Computer”. You will nd the camera disk on PC.
PARAMETER SETTING
1. Short press Menu button, rst menu is Video parameters setting list. Press and
hold Menu button to enter into second menu which is System parameters
setting list.
2. Video parameters setting list as below:
•
Resolution: 2304*1296 20P, 1920x1080 30P, 1440x1080 30P, 1280x720 30P,
800x480 30P, 640x480 30P
•
Video Quality: Fine, Normal, Economy. (Bitrate is dierent for dierent options)
•
Loop Recording: O, On
•
Recording Time: 3minutes, 5minutes, 10minutes, 20minutes