Owner`s manual
OPERATION
•
CAUTION:
DO
NOT
USE
THIS
INVERTER
WITH
THE
FOLLOWING:
• Small battery operated appliances such
as
RECHARGEABLE FLASHLIGHTS,SOME RECHARGEABLE
SHAVERS and
NIGHT
LIGHTS that
are
plugged directly into
as
RECEPTACLE
TO
RECHARGE
•
BATIERY
CHARGERS
used with certain power tool battery pecks. These chargers will have a WARNING
LABEL stating that
DANGEROUS
VOLTAGE
ARE
PRESENT
AT
THE
CHARGERS
BATIERY
TERMINALS.
-WARNING:
Batteries contain corrosive materials and present
an
Energy Hazard.
To
prevent irritation and burns,
wear
protective wear and clothing, and take special care to ensure no metal tools
or
personal objects contact
the
battery terminals.
• The Power Source Connection
The
power source must provide between
10.3
to
15.6
Volts
DC
and must be able
to
supply
the
necessary
current to operate
the
load.
The
power source
may
be a battery
or
a well-regulated 12V130A DC power
supply.
To
obtain
the
power source
must
deliver(in amperes), you can divide
the
power consumption
of
the
load (in watt) by 12 (the input voltage). For example,
the
load is rated
at
150
Watts,
the
power source
must
be
able
to
deliver: (t50/12)=12.5 Amp.
The
inverter is equipped with a heavy
duty
DC lighter plug that fits standard vehicle cigarette lighter and DC
power outlets. With this lighter plug.
the
inverter can power loads up to 220 Watts.
While using the battery
cable,
please follow these slaps:
A. Turn
off
the
power switch and
be
sure no flammable fumes
are
present.
B.
Connect the
BLACK
cable
to
the
NEGATIVE (-) terminal and RED cable to
the
POSITIVE
(+)
terminal
of
the battery.
The
reverse polarity connection wil result in a blown fuse and may cause permanent damage
to the inverter.
Do
not use
the
system with positive electrical grounding.
C.
Be
sure
to
fasten all connections between battery chips and terminals.
3