PMXU46BT - PMXU67BT - PMXU88BT - PMXU128BT Wireless BT Streaming Studio Mixer DJ Controller Audio Mixing Console System
Balanced, Unbalanced- What's the Difference? Signal Levels and the Decibel In a word: "noise." The whole point of balanced lines is noise rejection, and its something they're very good at. Any length of wire will act as an antenna to pick up the random electromagnetic radiation we're constantly surrounded by: radio and TV signals as well as spurious electromagnetic noise generated by power lines, motors, electric appliances, computer monitors, and a variety of other sources.
To EQ or Not to EQ In general: less is better. There are many situations in which you'll need to cut certain frequency ranges, but use boost sparingly, and with caution. Proper use of EQ can eliminate interference between instruments in a mix and give the overall sound better definition. Bad EQ-and most commonly bad boost-just sounds terrible.
Ambience Your mixes can be further refined by adding ambience effects such as reverb or delay. The internal effects can be used to add reverb or delay to individual channels in the same way as exlernal effects processors. (Refer to page 15). Reverb and Delay Time The optimum reverb time for a piece of music will depend on the music's tempo and density, but as a general rule longer reverb times are good for ballads, while shorter reverb times are more suited to up tempo tunes.
Caution! Connection Diagram • To prevent fire or shock hazard, do not expose the unit to rain or moisture. • Do not open the top cover (or the rear section), high voltage exist inside the unit dangerously. No user serviceable parts inside. • Refer servicing to qualified personnel. Built- in Power Amplifier Precautions! 1. Do not use this apparatus near water, if any liquid or water fall into the cabinet, unplug the unit and have it checked by a qualified personnel before operating it any further. 2.
4/6/8/12/16 Input Channel Mixer New MultiVoltage Power Supply for Worldwide Use 4/6/8 Input Channel, Powered Mixer • Built-in Wireless BT connects the mobile phone or in other BT player • Built-in MP3 player that supports variety of music formats • Connect the computer to record and play music • Digital DSP, 16 Multi-FX effects • Ultra -musical 3-band EQ on all channels • Peak LED all Channels • High accurate level indicator • Phantom power switch (+48V ) • Sealed rotary controls to resist dust and grime • R
31. POWER Switch: Use the POWER switch to turn on the mixing console. The POWER switch should always be in the "Off'' position when you are about to connect your unit to the mains. To disconnect the unit from the mains, pull out the main cord plug. When installing the product, ensure that the plug is easily accessible. 32. FUSE HOLDER/IEC MAINS RECEPTACLE: The console is connected to the mains via the cable supplied, which meets the required safety standards.
5. PEAK LED: The PEAK-LED lights up when the input signal is driven too high. lf this happens, back off the TRIM control and, if necessary, check the selling of the channel EQ. 6. PAN Control: The PAN control determines the position of the channel signal within the stereo image. When working with subgroups, you can use the PAN control to assign the signal to just one output, which gives you additional flexibility in recording situations. 7.
32. FUSE HOLDER/IEC MAINS RECEPTACLE: The console is connected to the mains via the supplied cable, which meets the required safety standards. Blown fuses must only be replaced by fuses of the same type and rating. The mains connection is made via a cable with IEC mains connector. An appropriate mains cable is supplied with the equipment. 33. MAIN OUT (L,R) Jacks: These jacks deliver the mixer's stereo output. Use these jacks to connect power amplifier to your main speakers. 34.
14. SUB Jack: Bass output jack. 15. MAIN OUT (L,R.) Jacks: These jacks deliver the mixer's stereo output. You use these jacks, for example, to connect to power amplifier driving your main speakers. 16. EFFECTOR Display: Show the kind of effector. 17. PROGRAM Control: You can select the effect preset by turning the PROGRAM control. The display flashes with the number of the current preset. To recall the selected preset, press on the button; the flashing stops.
INSTALLATION TROUBLESHOOTING If a problem occurs while operating, use this troubleshooting guide to help remedy the problem before requesting repairs. If the problem persists, consult your nearest dealer. Cable Connections You will need a large amount of cables for the various connections of the console. The image below shows the wiring of these cables. Use only HIGH GRADE cables PROBLEM 6.
PMXU46BT - PMXU67BT - PMXU88BT - PMXU128BT Wireless BT Streaming Studio Mixer - DJ Controller Audio Mixing Console System MODEL PMXU46BT PMXU67BT PMXU88BT PMXU128BT 4-Ch. 6-Ch. 8-Ch. 12-Ch. Input Mixer (+ FX/Headphones) (+ FX/Headphones) (+ FX/Headphones) (+ FX/Headphones) Channels Dimensions 13.8’’x12.5’’x3.66’’ 15.2’’x12.5’’x3.66’’ 16.3’’x12.5’’x3.66’’ 21.4’’x12.5’’x3.
