User Manual

www.PyleUSA.com 6 www.PyleUSA.com 7
b. Press it down, it is for MONO input, there will be two individual mono input signals.
16. [HIGH] Treble tone controller, adjust to enhance or attenuate for 15dB at12KHz.
17. [MID] Alto tone controller, adjust to enhance or attenuate for 15dB at 2.5KHz.
18. [LOW] Bass tone controller, adjust to enhance or attenuate for 15dB at 80Hz.
19. Eector Display, showing the selected eector number.
20. DSP selecting Buttons, press UP or DOWN to select from 24 DSP (see the eect list on
page 7). The display will ash the selected eect number.
21. [PARAMETER] Controller, used to adjust the depth of the selected eect, speed, etc.
22. [FX] Controller, control the eect level.
23. [+48V PHANTOM POWER] Button/LED, when the button is turned on, the LED light is on,
provide DC+48V phantom power to XLR plug on MIC mono input. Please turn on this
button when using the condenser microphone which is powered by a phantom power.
24. [PC REC] Switch for PC recording:
A. [PC REC] Switch should be used together with Point 15 [MIC/LINE] input switch.
B. When [PC REC] switch is bounce up on MIC+PC recording state:
a. The audio from PC plays can be owed back to PC record. The PC recording signal is
not only from PC plays, but also from MIC, GUITAR and STEREO inputs.
The recording volume of MIC and GUITAR are controlled by their corresponding
channel knobs, but the recording volume of STEREO IN is controlled by external audio
device only, all without MONITOR knob control
b. The MIC/LINE inputs, whether connect L or R input, when the input switch is on
MONO position, the PC recording signal is assigned to L and R recording tracks
simultaneously. When the switch is on STEREO position, L signal is assigned to L
recording tracks and R signal is assigned to R separately.
C. Press down the [PC REC] switch on MIC recording state:
a. The audio on PC still plays, but cut o the audio owed back to PC record, the PC
recording signal is from MIC and GUITAR inputs only. The recording volume is
controlled by their corresponding channel knobs, without MONITOR knob control.
b. The MIC/LINE inputs, whether the input switch is on MONO or STEREO position, L
signal is assigned to L recording tracks and R signal is assigned to R separately.
25. [MONITOR] Controller, used to adjust the volume of MONITOR output.
26. [CLIP L & R] LED, they will light up when the MONITOR output signal is too high.
27. [POWER ON] LED, it will light up when the mixer's power is on.
28. [PHONES] Controller, control the volume of earphones.
29. [PC USB] Controller, control the input level from PC USB port, adjust to balance the volume.
LIST OF EFFECTS
Features:
• Ultralow Noise Design with High Headroom
• USB Audio Interface for Computer Playing & Recording
• Preset 24 Digital Eects
• Providing 24Bits 48kHz Resolution for Amazingly-detailed and Pristine Recording Quality
• Independent 3.5mm Stereo Input
• Flexible Connectivity for a Variety of External Devices
• Two Kinds of Headphone’s Outputs for Optional (6.35mm & 3.5mm Stereo)
• Recording, Monitoring, and Leveling, All Accommodated in the Smallest of Spaces
• Rugged Metal Housing with Compact Size
• DC 5V Power Supply, or PC Power Supply
What's in the Box:
• USB Audio Interface • USB Cable
Technical Specs:
• Power Consumption: 7W
• Power Output Current: 1A
• Power Output Voltage: DC 5V
• Phantom Power Voltage: +48V DC
• T.H.D.: <0.5%@+4dBu(20Hz-20KHz)
• USB Interface: 2.0 Type-B
• Frequency Response: ±1dB, +4dBu@1kHz
• MIC/LINE: 2 Combo Jacks (XLR+6.35mm jack)
• Product Dimensions (L x W x H): 1.5'' x 6.8'' x 4.7'' -inches
24 DSP