Manualshelf

User Manual

ManualsBrandsPyle ManualsDJ controllersProfessional USB Audio Interface with MIC/LINE, Guitar, AUX Stereo and RCA Inputs, Phone/Stereo/Monitor Outputs
1234
www.PyleUSA.com
4
www.PyleUSA.com
5
CONTROLS AND FUNCTIONS
1. [MIC/LINE] Input jack, connect the microphone or musical instrument to the device.
The sockets are supporting both XLR and UNBALANCED 1/4" PLUG.
2. [GUITAR] Input jack, for connecting to an instrument, such as electric guitar or electric bass.
3. [AUX IN] 3.5mm auxiliary input jack, exible connectivity for a variety of external devices.
The playing from AUX IN, the volume can be controlled by external audio devices or
MONITOR knob. The input signal from AUX IN can be recorded to PC only when the [PC REC]
switch is bounce up on MIC+PC recording state. The recording volume is controlled by
external audio devices only, without MONOITOR knob control.
4. [RCA IN] Stereo input jack, allow for connection of TAPE or CD player and so on.
5. [PHONES] Output jack, two kinds of jacks (6.35mm and 3.5mm jacks) for optional, connect
with earphones, they are supporting stereo phone plug.
6. [STEREO OUT] 3.5mm auxiliary output jack.
7. [MONITOR OUT] Output, connect the active speaker or amplier.
8. [USB 2.0] Terminal, for data transferring, recording and power supplying. When connect
with computer, it supply power to mixer, and the audio data can be sent between mixer
and computer. It is supporting stereo play and record with 24 Bit, 48kHz sampling rate.
If using power socket or power bank for power supplying, it must meet the following
requirements: Output voltage: 4.8V to 5.2V
Output current: 1A or even more
9. [GUITAR] Controller, control the input level of guitar channel, adjust to balance the volume.
10. [RCA/AUX] Controller, control the input level of RCA and AUX inputs, adjust to balance
the volume.
11. [SIG] Signal indicator, the brightness will change with the intensity of the signal input.
12. [INPUT 1-2 L-R] Controller, control the input level of MIC/LINE channels, adjust to balance
the volume.
13. [PEAK] LED, it will light up when the input signal is too high. When the LED light will keep
ashing, please rotate the [INPUT] Controller counterclockwise to turn down the volume.
14. [PAD] Button, it will attenuate the sound input to the device when turn on this switch.
You can turn on the switch if you hear the distortion or [PEAK] LED indicator light is on.
15. [MIC/LINE] Converting switch:
a. When it is bounce up, it is for STEREO input, connect the MIC/LINE inputs, 1(L) is
channel L, 2(R) is channel R, compose to the stereo signal.
1 2 5 3
8 7 6 4
XLR Phone