User Manual

Step 4: Securing clamp bolts

Using the correct rubber pads (labeled for O.D.) install on both top and

bottom half of clamps. 3.15” x 1.2” x 0.2” rubber pads for 1.75” O.D. 3.15” x

1.2” x 0.08” rubber pads for 2” - 3” O.D. Using the 1/4” Hex bit socket hand

tighten the bolts evenly (both sides should have the same spacing

between bolts).

Step 5: Option for adjustable PYLE logo---Unbolt the screws rst, adjust the logo

direction, then re-x screws.

Features:

• Water-Resistant Rated Speakers

• SQL Audio Power Sports Amplier System Kit

• 2-Channel Marine Audio Amplier

• Marine Grade Rugged Construction

• Weather-Resistant Connectors

• Integrated Power Wiring Harness

• Perfect for Custom Installations & Applications

• Ability to Connect & Stream Audio from External Devices

• Aux (3.5mm) Input

• Pre-Amp RCA Out to Any OEM/Factory-Made Mono-Block/Full-Range Amplier

• Speaker Wiring Connectivity

• Anti-Thump Turn-On

• Soft Turn On/Oﬀ

• Overload & Power Protection Circuitry

• Used for Watercraft & Portable Mobile Vehicle Sound Systems

What’s in the Box:

•

(2) 6.5’’-inch Marine Speakers

• (2) Speaker Connection Wires, 6.5' ft.

• (2) 3” Aluminum Mounting Brackets (Pre-Installed on Speakers)

• (4) 3.15” x 1.2” x 0.2” Inches Rubber Pads

• (4) 3.15” x 1.2” x 0.08” Inches Rubber Pads

• (4) M8x55mm Hexagon Socket Head Cap Screws

• (4) M8x35mm Hexagon Socket Head Cap Screws (Pre-Installed)

• (1) Compact 2 Channel Marine Amp

• (4) Butt Connector 16-22AWG

• Screw Bag

• (4) Nylon Wire Straps