USB/SD BELT DRIVE TURNTABLE PLAYER PLTTB9U READ THIS INSTRUCTIONS CAREFULLY BEFORE USE AND STORE IN A SAFE PLACE FOR FUTURE REFERENCE
BEFORE • • The turntable features: USE Read this before operation 1. 3-speed turntable fit for 33 113,45,78 RPM Choose the installation location of your unit carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibrations and excessive dust, heat, cold or moisture. 2. belt-drive and semi-automatic play tone arm 4. ceramic stereo cartridge with jewel stylus The ventilation holes should not be covered.
CONNECTION 1. Connect the power cord to AC outlet 2. Switch the function selector to PHONO or USB/SD or TUNER function. Now your system is ready to play the music. CARD (SDIMMC) into SD socket. 2. 3. FM/AM OPERATION 1. Set FUNCTION switch to TUNER mode, then choose needed band (AM, FM and FM stereo) by BAND switch. 2. Search stations: Rotate the TUNER knob to choose request station, or press PREY/NEXT keys to choose idea stations. User can also press one of the two keys a litte longer around 1.
record's edge 3. Clean the stylus tip frequently, using a soft brush with a back-to-front motion only. 4. If you use a stylus cleaning fluid, use it very sparingly. 5. Wipe the dust cover and turntable housing gently with a soft cloth. Use only a small amount of mild detergent solution to clean the turntable and dust cover. 6. Never apply harsh chemicals or solvents to any part of the turntable system. 7.
