User Manual

-35-
1). Place the BC-HF-V01 and mobile
handset in 3 meters apart.
3). Set your BT phone to “discover”
the BC-HF-V01 .
Following your phone’s instruction
guide for details, active your mobile
handset’s BT function, the handset
will search for accessible BT devices.
4). Your phone will find this BC-HF-V01 .
Select this BC-HF-V01 from the list.
5). Enter passkey “8888”, then press
“OK” to pair the BC-HF-V01 and the
handset .
1. “Pair” To Your BT Phone
Prior to using the BC-HF-V01 for the fist
time, you must pair it with a BT-enabled
mobile handset.
The following steps describes pairing
the instruction for a typical BT-enabled
mobile handset.
Touch Screen Operation
BT OPERATION
2. Using The BT BC-HF-V01.
Once connecting is complete, you
may access the following function.
Some of the below mentioned funct-
ions only accessible for handset
supported with hands-free profile.
Touc h the screen of “ ” section
,
the dial numbers will display on the
monitor . then you can touch the
number section on screen , and
then touch the “ ” section to call
.
MAKE A CALL
CALL DIAL OUT
13800138000
To return to main menu
Fu nction
zone
Fu nction
zone
Please note : “ ” and “ ” serves as
the “ ” and “ ” button on your
mobile handset .
Note: When you dial the wrong number,
you can touch the screen of “ ” to
delete the wrong number . (You can also
press the “ ” button on the remote
control to do so
.)
2). Put the BC-HF-V01 in pairing mode.
a. Press the POWER button to turn
ON, the BT ICON will flash on TFT .
b. Touch the screen of “ ” section
or press longer the “PAIR/ ” on
the remote control until the word
“ BT ” icon flashing , it’s now ready
for pairing.
6). Select the “CONNECT” from the list
on the phone, if you connect succes-
sfully , the BT ICON remains solid on
the screen , then you can operate
the function of BT about the unit .
IMPORTANT:
1). If the pairing can not be completed
within approximately 2 minutes ,
whiles the pairing mode is activated,
and you will need to reattempt pairing
(See steps 2-5 above) .
2). After pairing is completed,
if the BT
ICON is stilling flash on the TFT ,
please follow the steps to reattempt
pairing through your handset until the
BT ICON remains solid on the screen.