User Manual

Touch Screen Operation
-20-
When an FM stereo broadcast is
hard to receive
Press ST/MO button on the remote
control to select the MONO or STEREO
mode . (When Stereo mode is activated,
the ST symbol will appear . )
Selecting The Frequency Band
Touch the screen of “ BAND ” section
repeatedly to select the band , the
message will show in turn :
FM1 FM2 FM3
AM2(MW2)
AM1(MW1)
RADIO OPERATION
Touch the RADIO ICON in home menu
to enter the RADIO mode:
To tune in strong-singnal FM
Station only (LO/DX function)
In home menu, then touch the “ SET ”
icon to enter the setting menu, the
message will display as below :
Start Searching For a Station
During Radio mode, briefly touch “ ”
to increase frequency by one step of
channel spacing.
Briefly touch “ ” to decrease frequency
by one step of channel spacing.
Manual Search
Automatic Search
During Radio mode, touch and hold
(for more than 2 seconds ) either “
/ ”
ICONS to start search for a radio station
automatically.
Tou c h the “ SOUND ” section on the
setting menu, touch the “ / ” ranges
to select the “ Radio L/D ” item, touch the
“ / ” ranges to choose between the
LOC and DX mode of Local and
Long-
distance traffic news .
Listening to radio
87.50
FM1
FM1
MHZ
MHZ
DX
DX
ST
USER
USER
1 2
3
88.50
88.50
90.00
90.00
98.00
98.00
65
4
80.50
80.50103.00
106.00
106.00
RADIO LOC/DX
DX
Note: the RDS icon displays only when
setting EUR FREQ and power off the unit
and then power on again.