PLSD131BT Motorized Foldout Monitor Holder 13.
To ensure safety while driving and to comply with laws, drivers should not watch video or operate the video device while driving.
Content Precaution...................................... 2 Radio Operation............................ 20 Safety Information......................... 3 Listening to the radio ...................... 20 Disc Note....................................... 4 Storing and Listening to a memory Installation .................................... 5 station ........................................ 20 Electric Connection ...................... 10 Automatic Memory Storing & Remote Control ........................
Precaution THANK YOU FOR PURCHASING THIS CAR DIGITAL VIDEO PLAYER . Before operating the unit, read this manual thoroughly and keep it handy for future reference . To avoid injury or accident , read the following precautions before installing and operating the unit . ON INSTALLATION DO NOT install any receiver in locations where; - it may obstruct the steering wheel and gearshift lever operations, as this may result in a traffic accident.
Safety Information CAUTION: THIS DIGITAL VIDEO PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DIGITAL VIDEO PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE . HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE DIGITAL VIDEO PLAYER CORRECTLY AS INSTRUCTED. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
Disc Note Disc formats supported by this player Digital Digital Video Video Audio and Video Disc size 12 cm VCD VCD Audio and Video Disc size 12 cm CD CD Audio Disc size 12 cm MP3 MP3 Audio Disc size 12 cm Discs which cannot be played with this player Digital Video-RAM CDV CDG Handling and Cleaning Dirt, dust, scratches and warping disc will cause misoperation. Do not place stickers or make scratches on discs. Do not warp discs.
Installation NOTES: Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
Installation INSTALLATION STEPS 1.
Installation 2) Attaching the control panel onto the chassis; (1) Insert the left side of the control panel into the hollow of the chassis . (NOTE : the “bulge” point on the control panel must be attached into the hollow of the chassis .) (2) Gently push the right side of the control panel till you feel a “ Click” . 1 Hollow 2 Bulge 3) Testing it for making sure that it can work properly . 4.
Installation Installating the unit DASH BOARD METAL MOUNTING STRAP HEX NUT SPRING WASHER PLAIN WASHER CONSOLE TAPPING SCREW SLIDE BRACKET HOUSING HEX BOLT SCREWDRIVER TABS KEY PLATE PLASTIC TRIM OUT KEY PLATE If you want to take CHASSIS out of the SLIDE BRACKET HOUSING, first remove the PLASTIC TRIM OUT of the both sides away, then insert the two KEY PLATE into left and right side of chassis as above illustration.
Installation Installing the monitor. 1) Press the OPEN/MONITOR-ANGLE button to slide the monitor holder out and stand it up. 2) Insert the 2 bulges of the monitor into the 2 hollows of the monitor holder and flip up the monitor, then push the top middle part of the monitor to make the monitor attach onto the monitor holder. Hollow Bulge Hollow Bulge MONITOR REL Removing the monitor.
Electric Connection WIRING CONNECTION RCH IN RED AV IN SUBWOOFER GREY VIDEO OUT(2) YELLOW REAR CAMERA INPUT YELLOW VIDEO IN YELLOW LCH IN WHITE FRONT RCA OUTPUT CABLE REAR OUTPUT CABLE RCH RED FRONT RCA RED R VIDEO OUT YELLOW LCH WHITE FRONT RCA WHITE L RADIO ANTENNA JACK ISO CONNECTOR IGNITION SWITCH(B+) MEMORY BACK-UP(B+) GROUND(B-) RED KEY GROUND(BLACK) FUSE KEY 1(VIOLET) YELLOW KEY 2(ORANGE) BLACK AUTO ANTENNA FRONT LCH SPK. REAR LCH SPK.
Remote Control 15 MODE 17 7 2 MUTE PLAY/PAUSE 16 STOP 3 REDIAL MO/ST ZOOM 19 13 22 20 PAIR 1 LOUD MENU EQ CLK LO/DX 21 6 14 23 OSD 24 18 BAND 9 ENTER TITLE/PBC A/PS VOL 11 VOL TOP RPT INT 1 2 3 10 5 4 SEL 12 RDM 6 AF 8 7 27 9 26 TA 4 SETUP GOTO +10 0 8 Ref # Button 5 25 Function 1 CLK Press it briefly to view the clock time . 2 PAIR/ 3 STOP 4 SETUP Pr es s it to us e the BT fun ct ion , ref er to se e BT op er at ion .
Remote Control Ref # Button 8 GOTO 9 / Function Press it button to begin playback at a moment in the program you designate. Use number buttons to enter the data that is needed. In BT menu, it serves as the asterisk button on your mobile handset. Press these buttons to skip ahead or back one track.
Remote Control Function Ref # Button 23 This button is used to confirm selections and settings within many ENTER of the menus in the OSD system. In DISC mode, press it to reverse rapidly 24 25 0-9 0/TA 9/AF 26 +10/ 27 1-6 Use to input numerical values during programming, with the GOTO button, or to directly select a track to play . In Radio mode, (when the RDS engaged,), 0 serves as TA function, 9 serves as the AF function .
Basic Operation Main Menu Operation GENERAL In many modes, touch the icon or touch the range to enter the main menu, the message like following as below. CLOCK AUDIO VIDEO Setup interface 1 (4) 10:00AM LANGUAGE ILLUMINATION COLOR CALIBRATION Setup interface 2 (1) (2) (3) (5) ADJUSTABLE ITEMS: 1. POWER icon In any modes, touch the POWER icon to switch the unit off . The monitor will draw in automatically . GENERAL ANIMATION 2.
Basic Operation Disc setup as follow: Wide (For 16:9 TV) Select when a wide-screen TV set is connected. DISC FORMAT NTSC TV TYPE 4:3PS RATING ADULT FORMAT This player is capable of playing discs recorded in either PAL or NTSC formats. Make the selection based on whether you are connecting the unit to a PAL TV or an NTSC TV. You can also set the unit to AUTO (auto select).
Basic Operation AUDIO SETUP Touch the audio to turn to audio quality adjustment. VIDEO SETUP VIDEO COLOR AUDIO BRIGHTNESS BASS CONTRAST TREBLE TINT SUBWOOFER ... EQ USER Video setup interface audio setup interface1 COLOR: 0 to 32 Adjust the color for the picture-lighter or darker. AUDIO LOUDNESS OFF FADER/BLANCE ... BRIGHTNESS: 0 to 32 Adjust if the picture is too bright or too dark. audio setup interface2 CONTRAST: 0 to 32 Adjust the contrast of the bright and dark portion.
Basic Operation ALTERNATE AUDIO SOURCE Reset Factory Settings On the front panel of the unit , there is an AUX IN jack, to connect analogue replay devices. Use this jack to replay sound of other replay equipment such as media players, computers, etc. Via the loudspeakers. RESET button is placed on the housing and must be activated with either a ballpoint pen or thin metal object. 1). Please f ollowing the diagram below, connect the external device with stereo jack plug the AUX IN socket . 2).
Control Panel UNIT KEYS Control Panel Sliding Pl ate di agram af ter remo ving Co ntrol Panel 1. OPEN BUTTON 10. |<>|/ 13. USB PORT and COVER BUTTON BUTTON 5. TA/AF BUTTON 14. AUX IN JACK 6. PAIR /BAND BUTTON 15. LCD SREEN 7. MUTE BUTTON 16. SD/MMC CARD SLOT 8. >||/CH1-6 BUTTON 17. RESET BUTTON 9. REL BUTTON 18.
Control Panel Same functions in any work source 1. POWER/MODE button In power off mode, pressing POWER/MODE button on remote control or pressing POWER/MODE button on control panel powers on main unit. In power on mode, long pressing POWER/MODE button on control panel or on remote control or touch icon on source menu powers off main unit.
Touch Screen Operation RADIO OPERATION Briefly touch “ ” to decrease frequency by one step of channel spacing. Listening to Radio Automatic Search During Radio mode, touch and hold (for more than 2 seconds ) either “ / ” ICONS to start search for a radio station automatically.
Touch Screen Operation Automatic Memory Storing & Program Scanning ADJUSTABLE ITEMS: Automatic Preset Setup In Radio Mode, touch and keep (for more than 2 ’ S) the screen of “ ” range to active automatic station storage. The radio searches within the current frequency band, e.g. FM 3 , for the stronger signal level until the search cycle has finished . The six strongest stations are then allocated to the corresponding storage locations . Then the station of the first storage location is set .
Touch Screen Operation PI MUTE : the sound of another station is suppressed . TA Traffic Announcement Touch the AF section on touch screen or swing and keep the SEL knob in the TA/AF direction for about 2 seconds , the AF function is activated. The AF symbol appears in the display . (Priority For Traffic Information) In Radio mode, touch the cursor button to switch the TA function ON and OFF . When the TA function is activated, the TA symbol appears in the display .
Touch Screen Operation Media Operation In audio play mode, the message will display as below : (When Parking Brake is applied .) To skip the next track To skip the previous track Repeat Function Random Function Previous menu Tap to turn to BT PHONE mode. (after pairing and connecting a mobile phone with BT function). The icons for other mode (The same icon have the same function in each mode) Mute function In PHOTO playing ,tap to change the photo direction.
Touch Screen Operation Note: when the JPEG disc playback, in normal mode, you can use the cursor buttons to rotate the picture . Press UP to invert an image . Press DOWN to mirror an image . Press LEFT to rotate an image to left . Press RIGHT to rotate an image to right . BASIC OPERATION Pause (still picture) Touch the “ ” section on touch screen during playback will stop play temporary, touch it again to return the normal playback .
Touch Screen Operation FOR VCD : 2. Example for VCD/SVCD, when it is on, it will display the information such as: Press the INT button on the remote control. It display will following menu as below : SE Q PL AY T 001/004 PBC MIX INTR O 1 Note: when select the INTRO Mode, this player to start to play the previous 15 seconds part of each track/chapter on disc. (Touch it again to cancel this mode .) 00:25:08 01:03:02 3. Example for Movie or PHOTO .
Touch Screen Operation the screen will display the following message : - Some discs only contain one subtitle language. - When no different subtitle language are recorded, “ INVALID KEY ” will be displayed at screen left top corner. 2. Multi-Audio Language Function Touch the to select the your adjustment item, then select the item your favour by touching the numberic buttons , then touch the OK button to confirm .
Touch Screen Operation BT Operation 1. Pairing and Connecting Prior to using the BT device named BC-HF-V03 as a hands-free system for a BT-enabled mobile phone for the first time, you must pair and connect them as follows: Press the BT hands-free icon or press the pair button on the remote control to turn to BT standby mode as right: * Prior to pairing and connecting, when displaying No Video interface of radio, CD, AUX IN or BT music, the logo BT flashes in the touch screen.
Touch Screen Operation b. Use the number icons or buttons to input your desired phone number; * When inputting a wrong digit, use c. After finishing inputting, touch to dial out. icon or < button to delete it. icon or press button on control panel 2) Redial last dialed phone number Touch icon or long press redial button on remote control to dial out the last dialed phone number. 3) Answer a call During an incoming call, the incoming telephone number displays in the the BT PHONE interface.
Touch Screen Operation Mute function To select the Equalizer mode To decrease the volume level To increase the volume level Loudness Function Subwoofer Function Turning pre-switching for traffic announcements on and off Switching on and off an Alternative frequency Play/Pause the playing To skip the next track To skip the previous track Tap to turn to BT PHONE mode. (after pairing and connecting a mobile phone with BT function).
Touch Screen Operation AUX Operation On the front panel of this unit, there is an AUX IN jack, follow the diagram below to connect analogue replay devices(only for the Audio connect, if you want to connect the Video, please plug the
Touch Screen Operation AV Operation Please plug the
Touch Screen Operation USB OPERATION Card OPERATION Following the diagram below, connect your USB device to the front panel USB port . If it is properly connected, the device will be mounted and start playing automatically. The unit can support playback MP3/WMA/ JPEG/MP4 and Divx format which are stored on SD memory cards . Please read the following instructions before you start using a memory card .
Touch Screen Operation STEERING WHEEL CONTROL Touch the SWC icon as follow to turn to steering wheel control . Then tap Assign and tap the button 1 and then select the icon as the picture show, the icon show in button 1 position. After selection tap confirm and back to home menu that means select finish. The function of the icons as follow: Touch to begin function save. After selection touch to confirm operation. During setting, touch the turn to home menu.
Specification General : Supply Voltage: Current Consumption: Signal System: Discs Played: 12V DC (11V-15V) Less than10 A Compositive video 1.
Troubleshooting Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. SYMPTOM No power CAUSE SOLUTION The car ignition switch is not on The fuse is blown If the power supply is properly connected to the car accessory terminal,switch the ignition key to "ACC" Replace the fuse Presence of disc inside the Remove the disc in the player, then put a new one player.
