User Manual

www.PyleUSA.com
OPERATION
7
TRUN ON/OFF THE UNIT
Press PWR button (1) to turn on the unit.
When the unit is on. Press and hold PWR
button (1) for 2 seconds to turn the unit off.
SOUND ADJUSTMENT
Press SEL button (1) shortly to select the
desired adjustment mode. The adjustment
mode will change in the following order:
BASTRELOUDEQLOCSTVOL
MCU version DVD version
BAS: bass
TRE: treble
BAL: balance
LOUD: Loudness
EQ: equalization
LOC: local
STEREO: stereo
VOL: volume
In each item, by rotating the audio knob (1) it
is possible to adjust the desired sound quality.
LOUDNESS
In LOUD item rotating the audio knob (1) to
turn the LOUDNESS function on/off.
EQ FUNCTION
In EQ item you can select the preset EQ
mode by rotating the audio knob (1) as below.
FLAT - POP - ROCK - CLASS - EQ OFF
LOC ON/OFF
In LOC item rotating the audio knob (1) to
turn on/off local function. In LOC ON mode
the unit will reduce the receiving sensitivity
when you search station. That means you can
receive the station that sounds good. It will
ignore the station that sound is not good. In
LOC OFF mode it will increase the receiving
sensitivity when you search the station. That
means you can receive more stations.
STEREO/MONO FUNCTION
In STEREO item rotating the audio knob
(1) to choose STEREO or MONO mode. In
STEREO mode you can receive FM stereo
signal. In MONO mode the stereo station
will be switched to monochrome.
Sometimes when the signal is not good.
Changing it to MONO mode will reduce
the noise.
LIQUID CRYSTAL DISPLAY (LCD)
The liquid crystal display (lcd) displays the
frequency, time and activated functions.
ALARM ON/OFF
Press ALARM ON/OFF button (5) to turn
on/off alarm function.
SEEING ALARM TIME
Short press ALARM SET button (4) to see
the alarm time.
SETTING THE ALARM
To set the alarm, press and hold the
ALARM SET button (4) for 2 seconds. The
number representing the hours will ash.
Rotating the VOL control (1) to adjust the
hour. Press ALARM SET again briey and
the number representing the minutes will
ash. Rotating the VOL control (1) to
adjust the minutes. Press the ALARM SET
button (4) again to store the alarm time.
Once a time is set, press ALARM ON/OFF
(5) to turn the alarm function on or off.
STOP THE ALARM OUTPUT
When time ran to the alarm time. The
head unit will output the alarm sound.
Pressing ALARM ON/OFF button(5) to
stop the alarm output.