User Manual

6
1. Connect BT controller box to your device
2. Press and Hold for three seconds until power indicator lights (red)
3. The system will automatically go into pairing mode
The powe indicator will turn red for about 7 seconds and then
alternating red and blue (BT blue Power red)
Please be sure that BT is turned on your device Select on
your device to connect BT controller (if the BT controller is connected
the light will turn blue and not flash)
4. When the device is out of BT range, BT will be disconnected
automatically and automatically reconnect when detected
in range again. (If not please just repeat steps 1 and 2)
5. When BT is disconnected or the 3.5mm AUX Input is plugged
in, the power indicator will glow red.
Playing Music:
1. Press to start or pause the music
2. Press shortly for next track
3. Press shortly for previous track
4. Press VOL+ shortly for volume up
5. Press VOL- shortly for volume down
www.PyleUSA.com
Play / Pause
Press Hold = On/Off
Previous Song
Volume Down
Next Song
Volume Up
BT Pairing and Connection:
BT Pairing and Connection: