User Guide
www.pyleaudio.com
Bluetooth Pairing and Connection:
1. Connect Bluetooth controller box to your device
2. Press and Hold for three seconds until power indicator lights (red)
3. The system will automatically go into pairing mode
The power indicator will turn red for about 7 seconds and then
alternating red and blue (Bluetooth blue Power red)
Please be sure that Bluetooth is turned on your device Select PLMRMB
Audio on your device to connect Bluetooth controller (if the
4. When the device is out of Bluetooth range, Bluetooth will be
disconnected automatically and automatically reconnect when
detected in range again. (If not please just repeat steps 1 and 2)
5.
When Bluetooth is disconnected or the 3.5mm AUX Input is
plugged in, the p
ower indicator will glow red.
Playing Music:
1. Press to start or pause the music
2. Press shortly for next track
3. Press shortly for previous track
4. Press VOL+ shortly for volume up
5. Press VOL- shortly for volume down
PLMRMBTxx
Pyleaudio.com
VOL
VOL
Play / Pause
Press Hold = On/Off
Previous Song
Volume Down
Next Song
Volume Up