User Manual

Machine Connections and Charge and discharge Matters

1. Video

2. LED

3. Display

A. Charge

When battery is low, it need to be charged, the charging method is as follows:

1.Remove the battery and charger from the case.

2.The charger DC male plug is inserted into battery charging hole.

3.The charger is connected to an ac between 110-240V, Indicator shows red, charging.

4.When indicator lights shows green, the charging is complete.

Note: The product should not be over-discharge when it is used, when it is found that

the battery is low, it should be charge in time; when the charger indicator shows green,

please stop charging, otherwise, the battery may be damaged.

B. Extraction Method of SD card (DVR type)

On the left of the display screen, gently press SD card, pop up the SD card.