7'' Portable LCD Monitor Underwater Fishing Camera 1000TVL Camera with 12pcs Infrared Lights, With DVR Recording Function
READ THIS MANUAL CAREFULLY BEFORE OPERATION. It is recommended that the battery be brought up to full charge before using. Contents Precaution 2 Range of Application 2 Features and Technical Specs 3 Display Operation Interface Description 4 Operating Instructions 4 Product Features 5 Machine Connections and Charge and discharge Matters 6 Accessory 7 Common faults and handling 7 Precaution 1. Please read the instructions carefully before use. 2.
Features and Technical Specs Features: • IP68 Water-Resistant • 12 Pieces Infrared LED • Fish Finder Waterproof Underwater • 7" TFT Color LCD Monitor • With IR Lights C • Removable Sun-visor Ideal for Bright Environment • Application: Ice/Ocean/Lake Fishing; Monitoring Aquaculture; Underwater Exploration; Swimming/Diving/Snorkeling • With DVR Recording Function What's in the Box: • 7’’ -inches Monitor • Waterproof Camera • Cable • Battery for Monitor • Sunshield Cover Technical Specs: • Construction Mat
Display Operation Interface Description 1. LED: Cycle switching between white light, infrared light and turn off light 2. OK: Confirmation of each settings 3. MENU: MENU/EXIT 4. - : When entering the Menu, option up/left, file preview up 5. + : When entering the Menu, option down/right, file preview down 6. Power: Power ON/OFF Operating Instructions Display Button Operation 1. Power ON: Connect the each connectors, and press the power button, then the system will start to work. 2.
2.4. Setting: After pressing OK button enter clock setting, card format, work mode (select recording mode or photo mode). Press OK button to save, press MENU button to exit 3. Video or Photo (Press OK button to start recording or taking a photo) When loading a new card or a card problem, please format the card in the system setting. 3.1. Press OK button, start to video recording or taking picture.
Machine Connections and Charge and discharge Matters 1. Video 2. LED 3. Display 3 1 2 A. Charge When battery is low, it need to be charged, the charging method is as follows: 1. Remove the battery and charger from the case. 2. The charger DC male plug is inserted into battery charging hole. 3. The charger is connected to an ac between 110-240V, Indicator shows red, charging. 4. When indicator lights shows green, the charging is complete.
Accessory 2 Camera 1. Cable 2. Winding wheel 3. Camera connector 4. LED 5. Lens 6. Stainless steel fin Camera Host 1. Cable 2. Camera 3. Display 4. Aluminum case 5. Battery 6. Charger 7. Plastic clip 8. Float 6 5 4 3 1 1 4 3 2 5 6 7 8 Common Faults and Handling Faults Phenomenon No power supply The indicator is on, no picture, light is off Causes and Treatment 1. Check if each terminal is connected or not 2. Check the insurance is disconnected 1. Check each connector if is connected 2.