User's Manual

Bluetooth Pairing:
1. Power on your receiver radio
When your unit is ON, it is ready to be 'paired' with your compatible Bluetooth-enabled device
2. From your smartphone or tablet, search for Bluetooth networks can select 'PyleUSA'
The pairing process may take up to 1 minute and your device must be within range of the receiver to connect
3. Once successfully paired, the 'B' icon will appear on the receiver's LCD display.
You can then press the 'MOD' button on the receiver to change between audio modes
Audio modes: AUX, Radio, 'BT' - Bluetooth
Troubleshooting
Problem Possible Cause Possible Solution
No power
1. Incorrect wiring
2. Blown fuse
3. Low battery voltage
1. Double-check wiring connections
2. Replace fuse
3. Check the voltage of the vehicle battery with a multimeter.
Voltage must be at least 11V
No Sound
1. Loose speaker connection
2. Bad speaker
3. Output blown
4. Volume too low on the connected
external device
1. Double check connections
2. Replace bad speaker with known good speaker and connect
3. Send unit in for repair
4. Increase volume of media device
*Be su
re to check all connections and make sure the unit is
properly ground
No Reception 1. Antenna not firmly connected 1. Insert antenna firmly
USB Memory Not
Being 'Read'
1. File types must be compatible 1. Convert the file types to an appropriate and compatible format
No Bluetooth
Connection
1. You are not paired to the receiver
from your device
2. Out of range
3. The connection is already in use
1. Choose the correct Bluetooth network from your device
2. Bring your compatible Bluetooth device closer to the receiver
3. The receiver may be paired to another device. Be sure to
disconnect the Bluetooth pairing connection from all other
devices, and attempt Bluetooth pairing again.
Visit www.Pyle h ^ .com for more
detailed product-specific information