PLMR18 OWNER’S MANUAL Mobile Audio System PLL Synthesizer Stereo Radio Automatic Memory Storing Preset Equalization USB/ SD Interface 3.5mm Jack input www.pyleaudio.
CONTENTS Installation ........................................... 3 Take out screw before installation ......... 3 DIN Front-Mount ................................. 3 Installing the unit ............................... 3 Removing the unit ............................. 4 Wiring Connection .............................. 5 Operation ............................................. 6 Location of keys .................................... 6 Switching on/off the unit ........................ 7 Sound adjustment ......
INSTALLATION Notes: Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
INSTALLATION Screw (5x25mm) and Plain Washer) to attach the other end of metal strap to a solid metal part of the vehicle under the dashboard. This strap also helps ensure proper electrical grounding of the unit. Note to install the short threading terminal of the mounting bolt to the back of the unit and the other long threading terminal to the dashboard. Spring Washer Hex Nut Metal Strap Mounting Bolt Plain Washer Tapping Screw 7. Reconnect the cable to the vehicle battery’s negative (-) terminal.
WIRING CONNECTION ISO CONNECTION 5
OPERATION LOCATION OF KEYS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 8/ (SEEK DOWN) button PUSH/SEL/ENT 9/ (SEEK UP) button IR\ LCD PWR/MODE AS/PS SD interface USB interface AUX IN 11. 12. 13. 14. 15. 16. 17. 18. 19.
OPERATION SWITCHING ON/OFF THE UNIT Press PWR button (6) to turn on the unit. When the unit is on. Press and hold for 2 seconds to turn off the unit. LIQUID CRYSTAL DISPLAY Exhibit current frequency and activated functions on the display . LOCAL function Press SEL knob several times till appear “DX”. Rotating the audio knob (2) to switch it to local mode. In LOC mode the unit will reduce the receiving sensitivity when you search station. That means you can receive the station that sound is good.
OPERATION preset number for several seconds with release mute, then searches again. RADIO OPERATION SWITCHING TO RADIO MODE Press MODE button (6) to select radio mode, the radio mode appears in the display together with the memory band and frequency. MANUALLY STORING STATION AND RECALL PRESET STATION To receive a station, Press one of the preset button(1~6) for 2 seconds. The current station is stored into the number button.
OPERATION REPEATING PLAYING Press RPT button (16) to continuously repeat the same file. Press it again to repeat all files. CAUTION： When there are important files in the USB Device or SD card, do not connect it to the main unit to play, because any wrong operation may cause files loss. And our company assumes no responsibility for this. PLAYING IN RANDOM ORDER press RDM button (15) to play all files in random order. Press it again to cancel the function.
REMOTE CONTROL (OPTIONAL) FUNCTION KEY & CONTROL Power ON/OFF Button. 1. 2. 3. 4. 5. VOL+ BAND SEL 6. 7. EQ 1/ 8. 4/RDM 9. 6/+10/DIR+: 10. 5/-10/DIR-: 11. 3/RPT 12. 2/INT 13. 14. 15. DISP VOL- 16. AMS 17. 18. MODE Volume up button. Band Select Button. Sound Mode Select Button Radio mode: seek/turn down station. MP3 mode: skip to the previous file or fast reverse. Press it to select desired audio equalization. Radio mode: Preset number 1. MP3 mode: Pause/playing file.
SPECIFICATIONS GENERAL PLMR18 Stereo Radio Headunit Receiver, Aux (3.5mm) MP3 Input, USB Flash & SD Card Readers, Remote Control (White) Features: In-Dash Console Headunit System USB Flash & SD Memory Card Readers MP3 Digital Audio File Compatibility AM/FM Radio - 30 Station Memory Presets Aux (3.
TROUBLE SHOOTING Before going through the checklist, check wiring connection. If any of the problems persist after checklist has been made, consult your nearest service dealer. Symptom Cause Solution The car ignition switch is not on. If the power supply is connected to the car accessory circuits, but the engine is not moving, switch the ignition key to “ACC”. The fuse is blown. Replace the fuse. Volume is in minimum Adjust volume to a desired level. Wiring is connected. Check wiring connection.
