Owner`s manual

INST
ALLATION
fro nt pa nel.
4. Lift the top of the outer trim ring then pull
it out to remove it.
5. Insert both of the supplied keys into the
slots at the middle left and right sides of
the unit, the n pull the unit o ut of the
dashboard.
DIN REAR-MOUNT (Method B)
If your vehicle is a Nissan, Toyota, follow
these mo unti ng ins truc tions.
Use the screw holes marked T (Toyota), N
(Nissan) located on both sides of the unit to
fasten the unit to the factory radio mounting
brackets supplied with your vehicle.
D
ashboar
d or
Console
Screw
Facto
ry Radio
Mounting Bracket
Side View showi
ng
Screw Holes marked
T, N
Screw
T
o
f
asten the unit to the factory radio
mounting brackets.
Align the screw holes on the bracket with
the screw holes o n the unit, a nd the n
tighten the screws (5x5mm) on each side.
Note: the outer trim ring, sleeve and the
metal strap are not used for method B
installation.