PLMR17BTS OWNER’S MANUAL Mobile Audio System PLL Synthesizer Stereo Radio Automatic Memory Storing USB&SD/MMC Card Interface Fold Down Detachable Panel Auxiliary Input Function Bluetooth Hands-free function & A2DP (Advanced Audio Distribution Profile) Stereo Audio Transmission Smartphone(Android and IOS system) control
INSTALLATION Notes: Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
INSTALLATION they will go (with the notches facing up) into the appropriate slots at the middle left and right sides of the unit. Then slide the sleeve off the back of the unit. Sleeve L Key Outer Trim Ring Front Panel R Key 6. Mount the sleeve by inserting the sleeve into the opening of the dashboard and bend open the tabs located around the sleeve with a screwdriver. Not all tabs will be able to make contact, so examine which ones will be most effective.
INSTALLATION front panel. 4. Lift the top of the outer trim ring then pull it out to remove it. 5. Insert both of the supplied keys into the slots at the middle left and right sides of the unit, then pull the unit out of the dashboard. DIN REAR-MOUNT (Method B) If your vehicle is a Nissan, Toyota, follow these mounting instructions. Use the screw holes marked T (Toyota), N (Nissan) located on both sides of the unit to fasten the unit to the factory radio mounting brackets supplied with your vehicle.
USING THE DETACHABLE FRONT PANEL REMOVING THE FRONT PANEL Precautions when handling 1. Press the release button ( ) on the front panel and pull off the front panel. 1. Do not drop the front panel. 2. Do not put pressure on the display or control buttons when removing or installing the front panel. 3. Do not touch the contacts on the front panel or on the main unit body. It may result in poor electrical contact. 4.
WIRING CONNECTION ISO CONNECTION
OPERATION LOCATION OF KEYS 1. MODE 2. (release button) 3. (hang up)/LOU/BND 4. VOL / SEL/MENU (Audio knob) 5. 6. MUTE 7.LCD 8. 4 RDM 9. 5 DIR10.1PAU 11.2 INT 12.3 RPT 13. AUX IN 14. 6 DIR+ 15. .USB interface 16 .9 LOC 17. SCAN/# 18.0 DSP 19.*/+/ AS/PS 20.8 EQ 21.7 MON 22.T-MENU/TRANS 23. 24. (pick up) 25. Reset button 26. SD/MMC interface 27.Mic 28.
OPERATION the unit working mode: Radio, USB, CARD, IPOD (optional), AUX and BT Audio. BASIC OPERATION SWITCHING ON/OFF THE UNIT Press button (6) to turn on the unit. When the unit is on, press and hold button (6) to turn the unit off. FACEPLATE RELEASE Press button (2) to removable faceplate. detach the SOUND ADJUSTMENT Rotate the SEL button (4) to adjust the volume. up or down step by step. Shortly press MUTE button (6) will mute the sound, press it again will resume the sound.
OPERATION equalization function and to select desired audio mode. There are five kinds of mode as below: →FLAT→CL AS→POP M→ROCK→EQ OFF AUXILIARY INPUT The unit can be connected to a portable audio player through the AUX IN jack (13) on the front panel. After finishing the connection, you can press MODE button (1) to switch the mode to AUX IN mode.
OPERATION press it again will exit this mode. REPEATING THE SAME TRACK Press RPT button (12) will repeat one/ repeat off/ random/random off the music playing. Press it again will exit this mode. PLAYING ALL TRACKS IN RANDOM Press RDM button (13), you can random/random off the music playing ESP FUNCTION (OPTIONAL) The unit can be shockproof about 70 seconds around for MP3 /WMA. SELECTING DIRECTORY UP/DOWN Press DIR- button (9) or DIR+ button (14) to select directory downward or upward.
OPERATION device or SD card. Do not connect it to the main unit to play. Because any wrong operation may cause files loss. BLUETOOTH OPERATION PREPAIR FOR OPERATION BLUETOOTH (i) When use Bluetooth, please make sure the mobile phone supports Bluetooth function. (ii) For the different kind of mobile phone, Bluetooth emissive power has some difference. To get the best conversation quality, it is commended that the distance between the mobile phone and the unit is within 3m.
OPERATION you set TALK to 20. The main volume will set to 100 automatically when a call is coming. Example: TALK volume MAIN volume 00 = 60 01 = 62 02 = 64 …………………….. 20 = 100 1) If you transfer the call to mobile phone, the mute of the present mode will be released at the same time. 2) When making an outgoing call, it’s not possible to transfer if the call is not being answered yet.
OPERATION 4. If you first time open the radio view, please tap the Menu key on your smartphone, and choose to connect a device as promotion, then scan for the BT devices. 5. Connect the smartphone and unit BT device named EP-BT. 6. When the BT connecting is established, you are ready to using the Apps and the unit LCD will displaying controlled by smartphone all the times until you shut down the radio view Apps.
OPERATION settings： Click Click ， entre into the ，enter into the USB mode： tunner settings： If no USB, all the icons will be in grey and can’t be touch.
OPERATION If no SD, all the icons will be in grey and can’t be touch. --/ ，enter into the Bluetooth Click A2DP interface as follow： ------- Click mode: ， enter into the AUX IN :Song name / :the previous or next song --- the current process status of the playing / ---Time have already played / The total time of the song Click inferface.
REMOTE CONTROL HANDSET(OPTIONAL) FUNCTION KEY & CONTROL 11. POWER Power ON/OFF Button 12. MODE 13.
SPECIFICATION GENERAL Power Supply Requirements : DC 12 Volts, Negative Ground Chassis Dimensions Tone Controls - Bass (at 100 Hz) - Treble (at 10 kHz) : 178 (W) x 107 (D) x 50 (H) : ±10 dB : ±10 dB Maximum Output Power : 4x60watts Current Drain : 15 Ampere (max.) RADIO (U.S.A) FM Frequency Coverage IF Sensitivity (S/N=30dB) Stereo Separation 87.5~108 MHz 10.
TROUBLE SHOOTING Before going through the checklist, check wiring connection. If any of the problems persist after checklist has been made, consult your nearest service dealer. Symptom No power Cause The car ignition switch is not on. Solution If the power supply is connected to the car accessory circuits, but the engine is not moving, switch the ignition key to “ACC”. The fuse is blown. Replace the fuse. Temperature inside the car is too high.
