CONTENTS Installation........................................... 3 Wiring Connection .............................. 5 Operation............................................. 6 Location of keys.................................... 6 Turn on/off the unit................................ 7 Sound adjustment................................. 7 Beep on/off ........................................... 7 EQ......................................................... 7 Loundness ............................................
INSTALLATION Notes: y Choose the mounting location where the unit will not interfere with the normal driving function of the driver. y Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. y Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
WIRING CONNECTION ISO CONNECTION 5
OPERATION LOCATION OF KEYS 1. BAND button 2. Seek down button 3. Power/SEL button 4. MODE button/BT 5. VOL - 6. VOL + 7. Seek up button 8. CLK button Play/pause button/SAVE 9. 10. LCD 11.
OPERATION TURN ON/OFF THE UNIT Press button (3) to turn on the unit. When the unit is on. Press and hold it for 2 seconds to turn off the unit. reduce the receiving sensitivity when you search station. That means you can receive the station that sound is good. It will ignores the station that sound is not good. In LOC OFF mode it will increase the receiving sensitivity when you search the station. That means you can receive more stations.
OPERATION player through the AUX IN interface. And press MODE button to switch AUX IN mode when inserted an audio source to the unit. “MANUAL” appears on the display, the manual tuning mode is selected. In this mode you can turn up/down a step frequency one by one till searched a station. If both buttons have not been pressed for several seconds, they will return to seek tuning mode and “AUTO” appears on the display. MEMORY FUNCTION When B+ wire and Acc wire is off.
OPERATION USB PLAY OPERATION BLUETOOTH OPERATION On the back side of the unit, there is a USB interface . You can connect an USB driver through this interface . When you connect an USB driver through the interface, the unit will search the MP3 /WMA files in the USB driver and start to play automatically. If in other mode, you can also press MODE button to select USB mode. It supports the MP3/WMA file in the device.
REMOTE CONTROL HANDSET FUNCTION KEY & CONTROL Power ON/OFF Button. 1. 2. 3. 4. 5. 6. 7. EQ 1/ 8. 4/RDM 9. 6/+10/DIR+: 10. VOL+ BAND SEL 5/-10/DIR-: 11. 3/RPT 12. 2/INT 13. DISP 14. VOL15. 16. AMS 17. 18. MODE Volume up button. band selection. SEL menu/ENTER. SEEK- / TURN- or SKIP- / FAST reverse (MP3/WMA) Press it to select desired audio equalization. In RADIO mode: Shortly press for listen to M1 station. Press and hold for store current station to button 1.
TROUBLE SHOOTING Before going through the checklist, check wiring connection. If any of the problems persist after checklist has been made, consult your nearest service dealer. Symptom No power. No sound. Cause Solution The car ignition switch is not on. If the power supply is connected to the car accessory circuits, but the engine is not moving, switch the ignition key to “ACC”. The fuse is blown. Replace the fuse. Volume is in minimum Adjust volume to a desired level. Wiring is connected.