User Manual

Song

Press and

Hold

Volume Down

Song

Prus and Held

Play/Paxze Volume Up

Press Hold On/Off

Bluetooth Pairing and Connection:

1 . Connect Bluetooth controller box to your device

2. Press and Hold for three seconds until power indicator

lights (red)

3. The system will automatically go into pairing mode

The power indicator will turn red for about 7 seconds and then

alternating red and blue (Bluetooth blue Power red)

Please be sure that Bluetooth is turned on your device Select Pyle

Audio on your device to connect Bluetooth controller (if the

Bluetooth controller is connected the light will turn blue and not flash)

4. When the device is out of Bluetooth range, Bluetooth will be

disconnected automatically and automatically reconnect when

detected in range again. (If not please just repeat steps 1 and 2) 5. When

Bluetooth is disconnected or the 3.5mm AUX Input is plugged in, the

power indicator will glow red.

Playing Music:

1 . Press to start or pause the music

2. Press >>+ shortly for next track, Press and hold for Volume up

3. Press shortly for previous track, Press and hold for Volume down